PRODUCTS CENTER
Product Description
LB series chemical process water circulating pump is a single-stage horizontal centrifugal pump with foot support. It is implemented according to AP1610 and VDMA 24297 standards of American Petroleum Institute. It has the characteristics of high reliability, long service life, stable operation, high generalization, cavitation and high efficiency.
1. Application scope
1.1. Refinery, petrochemical industry, coal processing industry and low temperature engineering;
1.2. Chemical industry, paper industry, pulp industry, sugar industry and general process industry;
1.3. Water supply plant and seawater desalination plant;
1.4. Heating and air conditioning system;
1.5. Power plant;
1.6. Environmental protection engineering; Shipbuilding and marine industry, etc.
2. Design features
2.1. According to AP1610 standard, the assembly of components is adopted, and the coupling has an extension. Ensure implementation of process industry structural maintenance standards.
When the pump is disassembled, the pipeline and motor need not be disassembled. It is easy to disassemble and repair. High reliability, good interchangeability, short downtime and low maintenance cost.
2.2. The basic parts of pumps of different specifications can be interchanged. Only 6 kinds of bearing parts are needed for 30 kinds of pumps, and only 6 kinds of bearing parts are needed for 30 kinds of pumps.
2.3. The double volute pump body (diameter over 80mm) has large diameter, large corrosion allowance, small radial force, small shaft deflection, bearing seal deflection less than 0.05mm, small flow velocity in the pipe, small vibration and low noise, and the pump body is equipped with automatic exhaust device. The pipeline has simple structure and good bearing capacity. The pump body does not need support, will not break, long life. The radial force is small, the shaft deflection is small, the deflection of bearing seal is less than 0.05mm, the flow velocity in the pipe is small, the vibration is small, the noise is low, and the pump body is equipped with automatic exhaust device. The pipeline has simple structure and good bearing capacity. The pump body does not need support, will not break, long life.
2.4. Closed impeller has strong adaptability to working conditions, high efficiency and low cavitation value. It is required that the NPSH of the device is small and the shaft does not contact with the conveying medium. This series of pumps, reasonable structure, easy maintenance, low energy consumption, stable and reliable, cheap.
2.5. Wear parts can be replaced, impeller and pump body wear ring, and shaft sleeve at shaft seal can be washed. When the pump body, impeller wear ring and sleeve wear, replace it, pump body, impeller and shaft can still be intermittent use. Save the cost of maintenance and spare parts, maintenance is simple and fast.
2.6. The size of stuffing box is suitable, and the stuffing seal and mechanical seal of various structures are interchangeable. Good interchangeability, the stuffing box does not need to be processed separately.
: next page