PRODUCTS CENTER
Cambodia Forward flow regeneration double current ion exchanger
Category:
Product Description
Forward flow regeneration double current ion exchanger
1. Introduction
1.1. Purpose
The dual flow ion exchanger filled with weak acid ion exchange resin can be used for alkali reduction and softening treatment of circulating cooling water in power station. It can also be used in series with strong acid hydrogen ion exchanger for chemical desalting water treatment to reduce drug consumption. The dual flow ion exchanger has good effect on reducing the hardness of carbonate in treated water, and has the advantages of large output and low acid consumption.
1.2. Model meaning
JSSL100•200
J -------- ion exchange
S -------- downstream
SL -------- Shuangliu
100 -------- equipment diameter (mm)
200 -------- resin layer height (mm)
1.3. Structural features
1.3.1. The upper and lower water inlet devices are in the form of domed porous plates, and the lower part is also added with quartz sand cushion.
1.3.2. The water outlet device is in the form of main pipe and branch pipe.
1.3.3. The regeneration liquid distribution device is in the form of main pipe and branch pipe.
1.3.4. The equipment is equipped with local sampling device and inlet and outlet pressure gauges.
1.3.5. The pressure rating of all interface flanges of the equipment is PN1.0MPa
The equipment can be equipped with manual rubber lined diaphragm valve and pneumatic rubber lined diaphragm valve.
1.3.7. The inner surface of the equipment is rubber lined.
1.4. Product series
See table 23-1 for the product series of forward flow regeneration double current ion exchanger
Table 23-1 product series of forward flow regeneration double current ion exchanger
| Nominal diameter design capacity (t/h) item |
DN1500 | DN2000 | DN2200 | DN2500 | |||||||||||||||||
| 90 | 160 | 190 | 250 | ||||||||||||||||||
| Model | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | |
| 150·130 | 150·150 | 150·180 | 150·210 | 150·250 | 200·130 | 200·150 | 200·180 | 200·210 | 200·250 | 220·130 | 220·150 | 220·180 | 220·210 | 220·250 | 250·130 | 250·150 | 250·180 | 250·210 | 250·250 | ||
| Resin volume(m3) | 2.3 | 2.65 | 3.18 | 3.71 | 4.41 | 4.08 | 4.71 | 5.65 | 6.59 | 7.85 | 4.94 | 5.7 | 6.84 | 7.98 | 9.5 | 6.37 | 7.35 | 8.82 | 10.29 | 12.25 | |
| Resin layer height | Upper layer height(mm) | 500 | 600 | 750 | 900 | 1100 | 500 | 600 | 750 | 900 | 1100 | 500 | 600 | 750 | 900 | 1100 | 500 | 600 | 750 | 900 | 1100 |
| Lower layer height(mm) | 800 | 900 | 1050 | 1200 | 1400 | 800 | 900 | 1050 | 1200 | 1400 | 800 | 900 | 1050 | 1200 | 1400 | 800 | 900 | 1050 | 1200 | 1400 | |
| General height(mm) | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | |
| Running mass(kg) | 3780 | 3849 | 3954 | 4077 | 4220 | 4450 | 4600 | 4800 | 5050 | 5250 | 5460 | 5760 | 5960 | 6160 | 6460 | 6500 | 6850 | 7000 | 7200 | 7500 | |
| Running load(N) | 130000 | 136300 | 146500 | 156600 | 170000 | 197800 | 210000 | 228000 | 246500 | 269800 | 240700 | 257200 | 278000 | 299700 | 328200 | 302000 | 322200 | 348700 | 376000 | 412000 | |
| Quartz sand cushion | Particle size 1~2 (mm) | 200 | 200 | 200 | 200 | ||||||||||||||||
| Particle size 2~4 (mm) | 100 | 150 | 150 | 150 | |||||||||||||||||
| Particle size 4~8 (mm) | 100 | 100 | 100 | 100 | |||||||||||||||||
| Particle size 8~16 (mm) | 100 | 150 | 150 | 150 | |||||||||||||||||
| Particle size 16~32 (mm) | 250 | 250 | 250 | 250 | |||||||||||||||||
| Volume(m3) | 1.091 | 2.15 | 2.528 | 3.369 | |||||||||||||||||
| Nominal diameter design capacity (t/h) item |
DN2800 | DN3000 | DN3200 | ||||||||||||||||||
| 300 | 350 | 400 | |||||||||||||||||||
| Model | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | JSSL | ||||||
| 280·130 | 280·130 | 280·180 | 280·210 | 280·250 | 300· | 300· | 300·180 | 300·210 | 300· | 300· | 320· | 320·180 | 320· | 320· | |||||||
| Resin volume(m3) | 8 | 9.23 | 11.08 | 12.93 | 15.39 | 9.18 | 10.6 | 12.72 | 14.8 | 17.6 | 10.45 | 12.06 | 14.47 | 16.88 | 20.1 | ||||||
| Resin layer height | Upper layer height(mm) | 500 | 600 | 750 | 900 | 1100 | 500 | 600 | 750 | 900 | 1100 | 500 | 600 | 750 | 900 | 1100 | |||||
| Lower layer height(mm) | 800 | 900 | 1050 | 1200 | 1400 | 800 | 900 | 1050 | 1200 | 1400 | 800 | 900 | 1050 | 1200 | 1400 | ||||||
| General height(mm) | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | ||||||
| Running mass(kg) | 7930 | 8230 | 8550 | 8850 | 9230 | 8580 | 8880 | 9200 | 9480 | 9880 | 9360 | 9860 | 10010 | 10360 | 10750 | ||||||
| Running load(N) | 383500 | 407400 | 442000 | 476500 | 522000 | 432000 | 458400 | 497600 | 536500 | 588500 | 483000 | 515300 | 557800 | 602300 | 660850 | ||||||
| Quartz sand cushion | Particle size 1~2 (mm) | 200 | 200 | 200 | |||||||||||||||||
| Particle size 2~4 (mm) | 150 | 150 | 150 | ||||||||||||||||||
| Particle size 4~8 (mm) | 100 | 100 | 100 | ||||||||||||||||||
| Particle size 8~16 (mm) | 200 | 200 | 200 | ||||||||||||||||||
| Particle size 16~32 (mm) | 300 | 300 | 300 | ||||||||||||||||||
| Volume(m3) | 4.41 | 4.95 | 5.49 | ||||||||||||||||||
2. Technical parameters
See table 23-2 for main technical parameters of forward flow regeneration double current ion exchanger
| Item | Data | Item | Data |
| Design pressure(MPa) | 0.6 | container form | Vertical |
| Design temperature(℃) | 50 | Welded joint coefficient | 0.85 |
| design flow rate(m/h) | 50 | material of the main body | Q235-B |
| Design capacity(t/h) | see table 23-1 | Resin layer height(mm) | see table 23-1 |
3. Equipment appearance and structural dimensions
The outline and structural dimensions of the parallel flow regeneration double current ion exchanger are shown in Fig. 23-1 and table 23-3

Table 23-3 configuration of forward flow regeneration double current ion exchanger
| Nominal diameter Resign height Item |
DN1500 | DN2000 | DN2200 | DN2500 | DN2800 | DN3000 | DN3200 | ||||||||||||||||||||||||||||
| 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | 1300 | 1500 | 1800 | 2100 | 2500 | |
| H1 | 4431 | 4771 | 5281 | 5791 | 6471 | 4693 | 5033 | 5543 | 6053 | 6733 | 4745 | 5085 | 5595 | 6105 | 6785 | 4935 | 5275 | 5785 | 6295 | 6975 | 5147 | 5487 | 5997 | 6507 | 7187 | 5197 | 5537 | 6047 | 6557 | 7237 | 5247 | 5587 | 6097 | 6607 | 7287 |
| H2 | 3660 | 4060 | 4510 | 5020 | 5700 | 3760 | 4100 | 4610 | 5120 | 5800 | 3760 | 4100 | 4610 | 5120 | 5800 | 3810 | 4150 | 4600 | 5170 | 5850 | 3910 | 4250 | 4760 | 5270 | 5950 | 3910 | 4250 | 4760 | 5270 | 5950 | 3910 | 4250 | 4760 | 5270 | 5950 |
| H3 | 1300 | 1300 | 1300 | 1500 | 1500 | 1500 | 1500 | ||||||||||||||||||||||||||||
| H4 | 1200 | 1200 | 1200 | 1400 | 1400 | 1400 | 1400 | ||||||||||||||||||||||||||||
| H5 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | ||||||||||||||||||||||||||||
| H6 | 642 | 497 | 497 | 547 | 547 | 547 | 547 | ||||||||||||||||||||||||||||
| H7 | 1300 | 1400 | 1400 | 1500 | 1600 | 1600 | 1600 | ||||||||||||||||||||||||||||
| H8 | 750 | 750 | 750 | 950 | 950 | 950 | 950 | ||||||||||||||||||||||||||||
| ∮ | 1400 | 1800 | 1900 | 2000 | 2150 | 2275 | 2400 | ||||||||||||||||||||||||||||
| L1 | 1021 | 1293 | 1395 | 1560 | 1747 | 1847 | 1947 | ||||||||||||||||||||||||||||
| L2 | 881 | 1138 | 1242 | 1393 | 1540 | 1642 | 1743 | ||||||||||||||||||||||||||||
| L3 | 1056 | 1343 | 1445 | 1635 | 1787 | 1887 | 1987 | ||||||||||||||||||||||||||||
| L4 | 1006 | 1273 | 1375 | 1545 | 1697 | 1797 | 1912 | ||||||||||||||||||||||||||||
| L5 | 616 | 686 | 686 | 801 | 836 | 836 | 896 | ||||||||||||||||||||||||||||
| L6 | 513 | 583 | 583 | 658 | 803 | 803 | 803 | ||||||||||||||||||||||||||||
| L7 | 498 | 583 | 583 | 673 | 673 | 673 | 733 | ||||||||||||||||||||||||||||
| L8 | 200 | 210 | 210 | 220 | 260 | 260 | 260 | ||||||||||||||||||||||||||||
| N×M | 180×200 | 180×200 | 180×200 | 300×350 | 180×200 | 180×200 | 180×200 | ||||||||||||||||||||||||||||
| DN1 | 100 | 125 | 125 | 150 | 200 | 200 | 200 | ||||||||||||||||||||||||||||
| DN2 | 80 | 100 | 100 | 125 | 125 | 125 | 125 | ||||||||||||||||||||||||||||
| DN3 | 150 | 200 | 200 | 250 | 250 | 250 | 250 | ||||||||||||||||||||||||||||
| DN4 | 32 | 40 | 40 | 40 | 50 | 50 | 50 | ||||||||||||||||||||||||||||
| DN5 | 80 | 80 | 80 | 100 | 100 | 100 | 100 | ||||||||||||||||||||||||||||
4. Ordering instructions
When the flow rate of regeneration liquid is more than 10m / h, please indicate when ordering.