PRODUCTS CENTER
Malta Supporting roller device
Category:
Product Description
The wagon dumper is used to dump coal, and the supporting roller device is installed below the ground. It works under the condition of large dust and humidity, so the dust is easy to enter into the bearing, so that the bearing can not be well lubricated, causing frequent damage, affecting the normal loading and unloading production.
After research, we decided to improve the seal of the roller device in combination with the actual working conditions of the work site. Firstly, the linear speed of the axle is calculated to be 0. 06 m/s, which belongs to low speed operation. Based on this, SD110*140*14 double lip rubber oil seal ring was adopted, and it is more suitable, which can achieve reliable sealing effect. However, there is a prominent problem that the failure grease can not be extruded from the bearing chamber when adding grease, resulting in difficulty in adding grease and poor lubrication effect. To solve this problem, we installed 6 pieces of self-made check valves on both end covers of the bearing, which were distributed uniformly according to the circumference of the side of the end cover. The one-way valve can make the waste grease discharged from the valve hole, but the dust can not enter from the hole
Through the improvement of the sealing form of the supporting roller device, the bearing sealing is strengthened, the smooth oiling is ensured, the bearing lubrication is improved, and the service life of the bearing is greatly increased.