PRODUCTS CENTER
Malta TSL double shaft humidification mixer
Category:
Product Description
TSL double shaft humidification mixer
1. Introduction
1.1. Purpose
TSL type double shaft humidifying mixer is a kind of equipment for mixing powdery materials with water. It can add water to the mixture of dry powder and granular materials to the mixture with uniform humidity, so as to facilitate the transportation by open dump truck. It is usually used in the pneumatic conveying system of large-scale coal-fired power plants and the humidification transportation of fly ash or the humidification pulping system.
1.2. Structural features
1.2.1. High mixing efficiency, compact structure, reasonable configuration of driving mechanism, smooth operation of the whole machine, small vibration and low noise.
1.2.2. The unique water spraying system can adjust the amount of water spraying easily and make the mixing of ash water more sufficient and reasonable.
1.2.3. Synchronous gear is used for transmission between two spiral shafts, which is reliable and easy to run.
2. Specifications and performance
The specification and performance of TSL double shaft humidification mixer are shown in table 22-1.
Table 22-1 specification and performance of TSL double shaft humidification mixer
| Model | TSL type | Model | TSL type |
| Capacity (t/h) | 60~200 | Water spray pressure (MPa) | 0.4~0.8 |
| Spindle speed (r/min) | 34~42 | Moisture content of wet ash (%) | 15(mass ratio) |
| Motor power (kW) | 15~37 |
3. Mass, shape and structural dimensions
See table 22-1 for equipment outline and table 22-2 for installation interface dimension of TSL double shaft humidification mixer

Table 22-2
| Model | TSL-60 | TSL-80 | TSL-100 | TSL-200 |
| Capacity (t/h) | 60 | 80 | 100 | 200 |
| A(mm) | 3640 | 4100 | 410 | 4425 |
| B(mm) | 2280 | 2460 | 2460 | 2620 |
| C(mm) | 1174 | 1380 | 1380 | 1786 |
| L(mm) | 4440 | 5140 | 5140 | 5520 |
| E(mm) | 745 | 765 | 765 | 830 |
| H(mm) | 1060 | 1320 | 1320 | 1584 |
| h(mm) | 470 | 660 | 660 | 780 |
| F(mm) | 530 | 640 | 640 | 840 |
| P(mm) | 400 | 500 | 500 | 700 |
| n1×A1(mm) | 3×120 | 5×116 | 5×116 | 8×97.5 |
| A2(mm) | 55 | 0 | 0 | 0 |
| n-∮d | 12-∮14 | 20-∮18 | 20-∮18 | 32-∮14 |
Note: n is the number of bolts