PRODUCTS CENTER
Malta DN1200 waste resin catcher
Category:
Product Description
DN1200 waste resin catcher
1. Introduction
Application 1.1
The waste resin catcher is mainly used on the waste water tank at the outlet of condensate polishing regeneration system in power plant to intercept the waste resin and prevent the leakage of waste resin.
1.2 model significance
HPU120
H --- water treatment
PU -- capture
120 -- nominal diameter of equipment (mm)
1.3 structural features
1.3.1. The internal device is a stainless steel wire wound filter element, and the filter element clearance is 0.2mm
1.3.2 black epoxy asphalt varnish is used for internal corrosion protection of equipment.
2. Technical parameters
See table 67-1 for main technical parameters of DN1200 waste resin trapper
Table 67-1 main technical parameters of DN1000 waste resin trapper
| Item | Data | Item | Data |
| Design pressure(MPa) | <0.1 | container form | Vertical |
| Design temperature(℃) | 50 | Medium | water, resin |
| Design volume (m3) | 0.7 | material of the main body | Q235-B |
| Design capacity (t/h) | 380 | Design net weight (kg) | 480 |
3. Equipment appearance and structural dimensions
See figure 67-1 for the external structure of the DN1200 waste resin trapper
