PRODUCTS CENTER
Malta DN3000 Medium pressure high speed mixed ion exchanger
Category:
Product Description
DN3000 Medium pressure high speed mixed ion exchanger
1. Introduction
1.1 purpose
Medium pressure and high-speed mixed ion exchanger is used in condensate polishing system of power plant. Strong acid cation resin and strong alkali anion resin are installed inside the equipment and mixed evenly, which can effectively remove trace dissolved substances and solid particles in condensate.
1.2 model significance
JHGSZ 300•7.07
J --- ion exchanger
H -- mixed bed
GS -- high speed
Z -------- medium voltage
300 -------- nominal diameter of equipment (mm)
7.07 --- resin volume (M3)
1.3 structural features
1.3.1. The water inlet device is in the form of multi orifice plate water cap
1.3.2. The water outlet device is in the form of spherical porous water cap
1.3.3. The inner surface of the equipment is lined with rubber for anti-corrosion.
2. Technical parameters
2.1 main technical parameters
The main technical parameters of DN3000 medium pressure high speed mixed ion exchanger are shown in table 60-1
Table 60-1 main technical parameters of DN3000 medium pressure high speed mixed ion exchanger
| Item | Data | Item | Data |
| Design pressure(MPa) | 3.5 | container form | spherical |
| Design temperature(℃) | 50 | Welded joint coefficient | 0.85 |
| Design flow rate (m/h) | 120 | material of the main body | Q345R |
| Catio resin : Anion resin | 1:1 | Equipment weight (kg) | 10960 |
| Resin volume (m3) | 7.71 | Running load (N) | 3500 |
| Design capacity (t/h) | 700 |
2.2 special parameters
2.2.1. The flow rate is 90-120m / h.
2.2.2. The effluent conductivity is less than 0.2us/cm
3. Equipment appearance and structural dimensions
The outline structure of DN3000 medium pressure and high speed mixed ion exchanger is shown in figure 60-1

4. Ordering instructions
The proportion of resin can be determined according to the process system. Please indicate the proportion of resin when ordering.