PRODUCTS CENTER
Malta DN1600 cation resin regeneration tank
Category:
Product Description
DN1600 cation resin regeneration tank
1. Introduction
1.1 purpose
Cation resin regeneration tank is used for condensate water treatment in vitro regeneration system. It is a kind of equipment to completely separate the cation resin and cation resin in the high-speed mixed ion exchanger, and then regenerate the cation resin.
1.2 model significance
JZYA160-3.86
J --- ion exchanger
Z -- Regeneration
YA -- cation resin
160 -- nominal diameter of equipment (mm)
3.86 -------- resin volume (M3)
1.3 structural features
1.3.1. The acid inlet unit is in the form of main pipe and branch pipe, and the branch pipe is in the form of filter element.
1.3.2. The drainage device at the lower part of the equipment is in the form of dished multi orifice plate water cap.
The equipment is lined with 1751 semi hard rubber.
1.3.4. The elevation of drain outlet and grease mixing port can be determined according to different process system requirements.
2. Technical parameters
The main technical parameters of DN 1600 cation resin regeneration tank are shown in table 48-1
Table 48-1 main technical parameters of DN 1600 cation resin regeneration tank
| Item | Data | Item | Data |
| Design pressure(MPa) | 0.75 | container form | Vertical |
| Design temperature(℃) | 50 | Welded joint coefficient | 0.85 |
| Resin volume (m3) | 3.86 | material of the main body | Q235-B |
| Equipment net weight (kg) | 3527 | Running load (N) | 11500 |
3. Equipment appearance and structural dimensions
See Fig. 48-1 for the external structure of DN 1600 cation resin regeneration tank
