PRODUCTS CENTER
Malta Quartz sand cushion forward flow regeneration ion exchanger
Category:
Product Description
Quartz sand mold forward flow regeneration ion exchanger
1. Introduction
1.1. Purpose
The equipment is used for water purification, and its operation is consistent with the direction of liquid flow through the exchanger during regeneration.
1.2. Model meaning
J SL 100•125 A
J -- Ion Exchange
SL -- downstream regeneration and lining
100 -------- equipment diameter (mm)
125 -------- resin diameter (mm)
A: quartz sand cushion
1.3. Structural features
1.3.1. The inlet and outlet devices are in the form of domed porous plates.
1.3.2. It is in the form of mother pipe and branch pipe.
1.3.3. The equipment is equipped with local sampling device and water inlet and outlet pressure gauges.
1.3.4. The pressure rating of all interface flanges is PN1.0MPa
1.3.5. The equipment can be equipped with manual rubber lined diaphragm valve and pneumatic rubber lined diaphragm valve.
1.3.6. The equipment is lined with 1751 semi-rigid adhesive for anti-corrosion.
1.4. Product series
See table 14-1 for the product series of quartz sand type downstream regeneration ion exchanger
| Nominal diameter resin layer height item |
DN1000 | DN1250 | DN1600 | DN1800 | DN2000 | ||||||||||
| 1250 | 1600 | 2000 | 1250 | 1600 | 2000 | 1250 | 1600 | 2000 | 1250 | 1600 | 2000 | 1250 | 1600 | 2000 | |
| JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | |
| 100·125A | 100·160A | 100·200A | 125·125A | 125·160A | 125·200A | 160·125A | 160·160A | 160·200A | 180·125A | 180·160A | 180·200A | 200·125A | 200·160A | 200·200A | |
| design capacity (t/h) | 15 | 25 | 40 | 50 | 65 | ||||||||||
| Resin volume (m3) | 0.98 | 1.26 | 1.57 | 1.54 | 1.96 | 2.45 | 2.51 | 3.2 | 4.02 | 3.2 | 4.07 | 5.1 | 3.9 | 5.02 | 6.28 |
| Design mass (kg) | 1278 | 1365 | 1468 | 1696 | 1820 | 1920 | 2190 | 2350 | 2533 | 2890 | 3121 | 3383 | 3320 | 3475 | 3766 |
| Operating load (N) | 51490 | 56710 | 62790 | 76990 | 85090 | 94370 | 119250 | 132060 | 143910 | 161050 | 177610 | 196490 | 194700 | 214900 | 237780 |
| Nominal diameter resin layer height item |
DN2200 | DN2500 | DN2800 | DN3000 | DN3200 | ||||||||||
| 1250 | 1600 | 2000 | 1600 | 2000 | 1600 | 2000 | 1600 | 2000 | 1600 | 2000 | |||||
| JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | JSL | |||||
| 220·125A | 220·160A | 220·200A | 250·160A | 250·200A | 280·160A | 280·200A | 300·160A | 300·200A | 320·160A | 320·200A | |||||
| design capacity (t/h) | 75 | 100 | 125 | 140 | 160 | ||||||||||
| Resin volume (m3) | 4.75 | 6.08 | 7.6 | 7.85 | 9.82 | 9.85 | 12.31 | 11.3 | 14.13 | 12.86 | 16.08 | ||||
| Design mass (kg) | 4053 | 4397 | 4790 | 5790 | 6234 | 6672 | 7256 | 7668 | 8302 | 8147 | 8822 | ||||
| Operating load (N) | 235560 | 260270 | 288520 | 335500 | 371340 | 435040 | 480280 | 497660 | 549180 | 557970 | 616150 | ||||
2. Technical parameters
2.1. Main technical parameters
See table 14-2 for the main technical parameters of quartz sand type downstream regeneration ion exchanger
Table 14-2 main technical parameters of quartz sand mold downstream regeneration ion exchanger
| Item | Data | Item | Data |
| Design pressure(MPa) | 0.6 | container form | Vertical |
| Design temperature(℃) | 50 | Welded joint coefficient | 0.85 |
| design flow rate(m/h) | 20 | material of the main body | Q235-B |
| Design capacity(t/h) | see table 14-1 | Resin layer height(mm) | see table 14-1 |
2.2. Special parameters
The consumption of regenerant is large, and the turbidity of influent is required to be less than 5mg / L
3. Equipment appearance and structural dimensions
See table 14-1, table 14-3 and table 14-4 for the outline and structural dimensions of quartz sand mold downstream regeneration ion exchanger

Table 14-3 external dimensions of quartz sand mold downstream regeneration ion exchanger
| Nominal diameter Resin layer height Item |
DN1000 | DN1250 | DN1600 | DN1800 | DN2000 | DN2200 | DN2500 | DN2800 | DN3000 | DN3200 | ||||||||||||||||
| 1250 | 1600 | 2000 | 1250 | 1600 | 1250 | 1250 | 1600 | 1600 | 1600 | 2000 | 2000 | 2000 | 1600 | 2000 | 1600 | 2000 | 2000 | 1250 | 1600 | 2000 | 1250 | 1600 | 2000 | 1600 | 2000 | |
| H | 3979 | 4539 | 5179 | 4149 | 4709 | 5349 | 4246 | 4806 | 5446 | 4433 | 4993 | 5633 | 4483 | 5403 | 5683 | 4550 | 5110 | 5750 | 5285 | 5925 | 5462 | 6102 | 5547 | 6187 | 5597 | 6237 |
| H1 | 1235 | 1335 | 1380 | 1440 | 1440 | 1485 | 1585 | 1585 | 1690 | 1690 | ||||||||||||||||
| H2 | 738 | 838 | 883 | 943 | 943 | 988 | 1088 | 1088 | 1193 | 1193 | ||||||||||||||||
| H3 | 445 | 545 | 560 | 580 | 580 | 595 | 695 | 695 | 730 | 730 | ||||||||||||||||
| H4 | 152 | 252 | 237 | 217 | 217 | 202 | 302 | 302 | 267 | 267 | ||||||||||||||||
| H5 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | ||||||||||||||||
| ∮ | 985 | 1000 | 1450 | 1600 | 1800 | 1900 | 2000 | 2150 | 2275 | 2400 | ||||||||||||||||
| L1 | 754 | 881 | 1071 | 1193 | 1293 | 1410 | 1560 | 1712 | 1874 | 1947 | ||||||||||||||||
| L2 | 729 | 856 | 1056 | 1158 | 1258 | 1360 | 1525 | 1677 | 1797 | 1897 | ||||||||||||||||
| L3 | 623 | 757 | 918 | 1025 | 1128 | 1233 | 1380 | 1536 | 1637 | 1740 | ||||||||||||||||
| L4 | 145 | 145 | 160 | 180 | 180 | 195 | 195 | 195 | 230 | 230 | ||||||||||||||||
| L5 | 251 | 251 | 316 | 336 | 336 | 401 | 401 | 401 | 436 | 436 | ||||||||||||||||
| L6 | 180 | 180 | 250 | 250 | 250 | 250 | 280 | 280 | 280 | 280 | ||||||||||||||||
| LA~LE | See table 14-4 | |||||||||||||||||||||||||
| N×M | 100×140 | 180×220 | 180×220 | 180×220 | 180×220 | 180×220 | 300×350 | 300×350 | 300×350 | 300×350 | ||||||||||||||||
| DN1 | 80 | 80 | 100 | 125 | 125 | 150 | 150 | 150 | 200 | 200 | ||||||||||||||||
| DN2 | 50 | 50 | 80 | 100 | 100 | 125 | 125 | 125 | 150 | 150 | ||||||||||||||||
| DN3 | 50 | 50 | 80 | 80 | 80 | 80 | 100 | 100 | 125 | 125 | ||||||||||||||||
| DN4 | 32 | 32 | 32 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | ||||||||||||||||
| ∮ | 980 | 1000 | 1450 | 1600 | 1800 | 1900 | 2000 | 2150 | 2275 | 2400 | ||||||||||||||||
| Gradation of quartz sand filler | ||||||||||||||||||||||||||
| Particle size 1~2 | 200 | 200 | 200 | |||||||||||||||||||||||
| Particle size 2~4 | 100 | 150 | 150 | |||||||||||||||||||||||
| Particle size 4~8 | 100 | 100 | 100 | |||||||||||||||||||||||
| Particle size 8~16 | 100 | 150 | 200 | |||||||||||||||||||||||
| Particle size 16~32 | 250 | 250 | 300 | |||||||||||||||||||||||
Table 14-4 quartz sand mold forward flow regeneration ion exchanger LA ~ LD
| Main parameter Manual or Pneumatic type Sanders pneumatic Nominal diameter |
LA | LB | LC | LD | LE |
| DN1000 | 300 | 210 | — | — | 200 |
| 258 | 194 | ||||
| DN1250 | 300 | 210 | — | — | 200 |
| 258 | 194 | ||||
| DN1600 | 350 | 300 | — | — | 250 |
| 309 | 258 | ||||
| DN1800 | 400 | 350 | — | — | 280 |
| 362 | 309 | ||||
| DN2000 | 400 | 350 | — | — | 280 |
| 362 | 309 | ||||
| DN2200 | 460 | 400 | — | — | 350 |
| 412 | 362 | ||||
| DN2500 | 460 | 400 | — | — | 350 |
| 412 | 362 | ||||
| DN2800 | 460 | 400 | — | — | 350 |
| 412 | 362 | ||||
| DN3000 | 570 | 460 | 140 | 430 | — |
| 529 | 412 | ||||
| DN3200 | 570 | 460 | 140 | 430 | — |
| 529 | 412 |
Note: for manual rubber lined diaphragm valve, LC, LD, LE values are zero.
4. Ordering instructions
The regeneration liquid of the equipment is hydrochloric acid, sulfuric acid and sodium hydroxide. When the flow rate of regeneration liquid is more than 10m / h, it should be indicated when ordering.