全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Malta GYT Horizontal active carbon filter

Product Description

Horizontal activated carbon filter

 

1. Introduction

1.1. Purpose

Horizontal activated carbon filter is mainly used to remove residual chlorine, chroma, organic matter and colloidal silicon in water. As a pretreatment system equipment of ion exchanger, it can prevent resin poisoning pollution and ensure the service life of resin. It has the characteristics of large water output and small floor area.

1.2. Model meaning

             G Y T 300•120

             G ------ filtration

             Y -------- pressure type

             T -------- activated carbon

             300 -------- equipment diameter (CM)

             120 -------- height of packing layer (CM)

1.3. Structural features

1.3.1. The upper water inlet device is in the form of main branch pipe.

1.3.2. The lower water outlet device is in the form of multi orifice plate water cap.

1.3.3 black boiler asphalt paint shall be used for anti-corrosion of internal surface of equipment.

The equipment is equipped with local sampling device and inlet and outlet pressure gauges.

1.3.5. The pressure rating of all interface flanges is PN1.0MPa

 

2. Technical parameters

The main technical parameters of horizontal activated carbon filter are shown in table 9-1.

Table 9-1 main technical parameters of horizontal activated carbon filter

Item Data Item Data
Design pressure(MPa) 0.6 Welded joint coefficient 0.85
Design temperature(℃) 40 material of the main body Q235-B
Design flow rate(m/h) 10 design capacity (t/h) single chamber 80
Design height(mm) 1200 container form horizontal

 

3. Equipment appearance and structural dimensions

The shape and structural dimensions of horizontal activated carbon equipment are shown in Fig. 9-1 and table 9-2.

Table 9-2 nozzle table of horizontal activated carbon filter

Code Pipe specification Usage and name Sealing type
a1-4 DN250,PN1.0MPa inlet Horizontal
b1-4 DN25,PN1.0MPa outlet
c1-4 DN40,PN1.0MPa exhaust port
d1-4 DN100,PN1.0MPa backwash air inlet
e1-4 DN125,PN1.0MPa Viewing glass
f1-8 DN500,PN1.0MPa Access hole
g1-4 DN20,PN1.0MPa Loading hole
h1-4 DN10PN1.0MPa Sampling port