PRODUCTS CENTER
Malta Double chambers & flows active carbon filter
Category:
Product Description
Double chamber and double flow activated carbon filter
1. Introduction
1.1. Purpose
The double chamber and double flow activated carbon filter is mainly used to remove residual chlorine, chroma, organic matter and colloidal silicon in water. As a pretreatment system equipment of ion exchanger, it can prevent resin poisoning pollution and ensure the service life of resin. It has the characteristics of large water output and small floor area.
1.2. Model meaning
G Y T 320•120
G ------ filtration
Y -------- pressure type
T----------Activated carbon
320 -------- equipment diameter (CM)
120--------Height of packing layer (CM)
1.3. Structural features
1.3.1. The upper water inlet device is in the form of main branch pipe.
1.3.2. The lower water outlet device is in the form of multi orifice plate water cap,
1.3.3. The equipment is lined with 1751 semi hard rubber.
1.3.4. The equipment is equipped with local sampling device and inlet and outlet pressure gauges.
1.3.5. The pressure rating of all interface flanges is PN1.0MPa
1.3.6. The valve model is G41J-6.
2. Technical parameters
The main technical parameters of double chamber and double flow activated carbon filter are shown in table 7-1,
Table 7-1 main technical parameters of double chamber double flow activated carbon filter
| Item | Data | Item | Data |
| Design pressure(MPa) | 0.6 | Welded joint coefficient | 0.85 |
| Design temperature(℃) | 50 | Corrosion allowance(mm) | 0 |
| Design flow rate(m/h) | 13 | material of the main body | Q235-B |
| Design height(mm) | 1200 | design capacity (t/h) | single chamber105 |
| medium | water | Container form | vertical |
3. Equipment shape and structure size
see Fig. 7-1
