PRODUCTS CENTER
Malta BDZKG gravity air scrubbing multi valve filter
Category:
Product Description
BDZKG gravity air scrubbing multi valve filter
1. Introduction
Bdzkg gravity air scrubbing multi valve filter is a new type of filter which combines the air scrubbing function of valveless filter and mechanical filter. During normal operation, it can be operated as valveless filter (only the inlet valve is opened at this time); when the pressure difference of filter layer is large or the turbidity of effluent is slightly higher than the normal value, the air scrubbing function can be used to make the backwashing complete, so as to ensure the quality of effluent. The equipment is a steel assembly with compact layout, simple operation and convenient maintenance. The specifications of gravity type air scrubbing filter series of Jiangsu Bada Technology Co., Ltd. are 60-500t / h. The products of 80 t / h, 120 t / h and 160 t / h are mainly introduced here.
2. Main technical parameters
The main technical parameters of gravity air scrubbing multi valve filter are shown in table 2-1
Table 2-1 main technical parameters of gravity air scrubbing valve filter
| Model | diameter of filter | capacity | influent turbidity | effluent turbidity | reverse water supply intensity | Air scrubbing strength〔L/(M2·S〕 | Air scrubbing pressure(MPa) | Operating flow rate |
| (∮) | (t/h) | (mg/L) | (mg/L) | 〔L/(M2·S〕 | (t/h) | |||
| BDZKG-320 | 3216 | 57~86 | ≤20 | 2~5 | 13~16 | 10~20 | ≥0.15 | 8~10 |
| BDZKG-440 | 4416 | 110~165 | ≤20 | 2~5 | 13~16 | 10~20 | ≥0.15 | 8~10 |
| BDZKG-500 | 5016 | 155~196 | ≤20 | 2~5 | 13~16 | 10~20 | ≥0.15 | 8~10 |
3. Technical specification for quartz sand cushion and filter material, anthracite filter material
See table 2-2 for technical specifications of quartz sand cushion and filter material and anthracite filter material.
Table 2-2 technical specification of lime sand cushion and filter material and anthracite filter material
| diameter of filter | Quartz sand cushion | Quartz sand filter material | Anthracite filter layer | ||||||
| Height | Particle size | mass | Height | Particle size | mass | Height | Particle size | mass | |
| (mm) | (mm) | (t) | (mm) | (mm) | (t) | (mm) | (mm) | (t) | |
| 3216 | 200 | 2~6 | 2.4 | 400 | 0.5~1.0 | 4.8 | 200 | 1.2~1.6 | 2.2 |
| 4416 | 200 | 2~6 | 4.6 | 400 | 0.5~1.0 | 9.2 | 200 | 1.2~1.6 | 4.1 |
| 5016 | 200 | 2~6 | 5.9 | 400 | 0.5~1.0 | 11.8 | 200 | 1.2~1.6 | 5.3 |
4. Process principle
The inlet water of gravity type air scrubbing multi valve filter should be the water after coagulation and clarification, which flows by gravity, and the water passes through the water distribution device
It is placed in the equipment for natural filtration from top to bottom, and the filtered water flows into the clear water tank of the device for storage
After the tank is full of water, the clear water overflows from the water outlet and enters the water supply system. The process flow is shown in Figure 2-1.

5. Schematic diagram of gravity air scrubbing multi valve filtration
The schematic diagram of gravity air scrubbing multi valve device is shown in Fig. 2-2

6. Operation procedure table
The operation procedure is shown in table 2-3
Table 2-3 operation procedure table
| Steps | Operation contents | inlet valve | reverse discharge valve | connecting valve | drain valve | intake valve | Time(min) | Remarks |
| 1 | Discharging water from compartments |
Turn on | Turn on | 2 | ||||
| 2 | air scrubbing | Turn on | Turn on | 5 | ||||
| 3 | water backwashing | Turn on | Turn on | 5 | ||||
| 4 | washing drainage | Turn on | Turn on | |||||
| 5 | normal operation | Turn on | Turn on | |||||
| 6 | Discharge unqualified water | Turn on | ||||||
| 7 | Valve No. | D1 | D2 | D3 | D4 | D5 |
7. Structure and nozzle size table
The structure and nozzle size of gravity air scrubbing multi valve filter are shown in table 2-4
Table 2-4 structure and nozzle size of gravity air scrubbing multi valve filter
| Model | BDZKG-320 | BDZKG-440 | BDZKG-500 |
| Filter diameter ∮ (mm) | 3216 | 4416 | 5016 |
| Filter floor diameter ∮ (mm) | 3260 | 4460 | 5060 |
| Water inlet pipe diameter (mm) | DN150 | DN250 | DN300 |
| H1(mm) | 3400 | 3550 | 3850 |
| Outlet diameter (mm) | DN150 | DN250 | DN300 |
| Diameter of upper connecting port (mm) | DN300 | DN400 | DN500 |
| H2(mm) | 2452 | 2740 | 2950 |
| Diameter of lower connecting port (mm) | DN300 | DN400 | DN500 |
| H3(mm) | 280 | 380 | 450 |
| Diameter of compressed air inlet (mm) | DN100 | DN125 | DN150 |
| H4(mm) | 925 | 1090 | 1250 |
| Height of filter body H (mm) | 6150 | 6500 | 7200 |
| Load (T) | 70 | 120 | 190 |