PRODUCTS CENTER
Product Description
YG series impeller coal feeder
1. Introduction
1.1. Purpose
Impeller coal feeder is one of the main equipment in the normal coal ditch of thermal power generation. It can walk along the longitudinal track of the coal ditch, and can also stay at some place to draw coal to the coal conveyor belt quantitatively, evenly and continuously. The machine is suitable for coal, metallurgy, mineral processing, building materials, chemical industry and other industries.
1.2. Model meaning
*-YG-##
* ------ Q is bridge type, B is impeller swing out type, M is gate type, S is bilateral type
YG -------- impeller coal feeder (SG is upper drive impeller coal feeder)
## -------- production capacity (T / h)
1.3. Structural features
1.3.1. The transmission system adopts closed structure.
1.3.2. Within the range of rated output, stepless speed regulation (mainly frequency conversion) can be carried out for impeller coal shifting.
1.3.3. Impeller and traveling crane have their own independent transmission mechanism, which is convenient for installation and maintenance.
1.3.4. The machine can transfer coal in situ or in walking.
1.3.5. Byg series impeller coal feeder can realize the lateral movement of coal shifting mechanism, which is convenient for maintenance. The main reducer and the traveling deceleration motor all adopt hard tooth surface.
In addition to the structural features of qyg, myg and SyG series impeller coal feeders, the QSG series upper drive impeller coal feeder has the features of easy maintenance of main reducer, more reasonable coal hopper layout and less coal leakage due to the upper drive mode adopted by its coal feeding system (i.e. the transmission system is above the impeller claw). Because its impeller adopts hanging type, it is not easy to wind wire rope and other sundries when pulling coal.
1.4. Working principle
The main motor is controlled by electrical appliances, and the impeller and wheel are driven by the main motor and walking motor. It uses the motor to control the stepless speed regulation system of impeller (frequency conversion speed regulation), so as to achieve the purpose of adjusting coal quantity.
1.4.1. Mechanical transmission principle of coal shifting mechanism. The motor drives the main reducer through nylon pin coupling (which is equipped with alarm device), and then drives the impeller to work.
1.4.2. Mechanical transmission principle of traveling mechanism. The asynchronous motor drives the traveling reducer, and then drives the traveling wheel set.
1.4.3. Working principle of impeller swing out mechanism. The electric push rod is used to drive the moving bottom plate, and the coal shifting mechanism installed on it is moved out along the transverse track, so that the impeller and the main reducer are far away from the coal ditch, which is convenient to replace the impeller and overhaul the main reducer.
1.5. Product series YG series products are shown in table 42-1
| Sereis' name | Product models | |||
| QYG | QYG-300 | QYG-600 | QYG-1000 | QYG-1000 |
| MYG | MYG-300 | MYG-600 | MYG-1000 | - |
| SYG | SYG-300 | SYG-600 | - | - |
| QSG | QSG-300 | QSG-600 | QSG-1000 | QSG-1500 |
| BYG | BYG-300 | BYG-600 | BYG-1000 | BYG-1500 |
2. Main technical parameters
Main technical parameters of YG series impeller coal feeder are shown in table 42-2
| Model | BYG-300 | BYG-600 | BYG-1000 | MYG-300 | MYG-600 | MYG-1000 | SYG-300 | SYG-600 | BYG-1500 | |||
| QYG-300 | QYG-6300 | QYG-1000 | (QSG-300) | (QSG-600) | (QSG-1000) | QSG-1500 | ||||||
| QYG-1500 | ||||||||||||
| material charactors | Volume | 0.9 | ||||||||||
| (t/m) | ||||||||||||
| Particle size | ≤300 | |||||||||||
| (mm) | ||||||||||||
| Capacity | 100~300 | 200~600 | 300~1000 | 100~300 | 200~600 | 300~1000 | 100~300 | 200~600 | 500~1500 | |||
| (t/h) | ||||||||||||
| impeller(mm) | 2680 | 300 | 2680 | 2680 | 3000 | 2200 | 2320 | 3000 | ||||
| -2880 | -2980 | |||||||||||
| impeller speed under rated capacity(r/min) | 1.9~5.8 | 3.76~8.3 | 3~10 | 1.9~5.8 | 3.76~8.3 | 3~10 | 1.9~5.8 | 2.78~6.3 | 4~12 | |||
| (2.76~8.3) | ||||||||||||
| coal supplying apparatus' motor | Power(KW) | 15 | 18.5 | 22 | 15 | 18.5 | 22 | 15 | 18.5 | 30 | ||
| speed range(r/min) | 400~1200 | |||||||||||
| Dolly speed | 2.09 | 3.71 | 2.09 | 3.74 | 4.18 | 4.18 | 3.7 | |||||
| (m/min) | -2.4 | |||||||||||
| Dolly wheel diameter(mm) | 350 | 350 | 350 | 350 | 350 | 350 | 350 | |||||
| Dolley motor power | 3 | 2×2.2 | 2×2.2 | 2×2.2 | 3 | 3 | 2×2.2 | |||||
| (KW) | (2×1.5) | |||||||||||
| Track span L | 1600 | 1800 | 2000 | 1800 | 2300 | 2600 | 1740 | 1740 | 2000 | |||
| (mm) | -1600 | -1800 | -2000 | |||||||||
| Mounting height H | 910 | 1030 | 1150 | 2110 | 2535 | 2730 | 1353 | 1353 | 1150 | |||
| (mm) | -910 | -1030 | -1150 | |||||||||
| Machine length A | 5700 | 6500 | 7000 | 5700 | 5500 | 6500 | 5300 | 7700 | ||||
| (mm) | -6400 | -6400 | -7700 | |||||||||
3. Equipment appearance and structural dimensions
The structure and shape of byg series impeller coal feeder are shown in Fig. 42-1; QSG series impeller coal feeder is shown in Fig. 42-2; myg series impeller coal feeder is shown in Fig. 42-3; qyg series impeller coal feeder is shown in Fig. 42-4; SyG series impeller coal feeder is shown in Fig. 42-5





4. Selection method
The impeller coal feeder can be selected according to the output of coal conveying system in power plant.
5. Scope of supply and ordering instructions
5.1. Scope of supply
5.1.1. Complete set of main engine.
5.1.2. Cables, small models and steel wire ropes matching with various series of main engines.
5.1.3. Single machine supporting: ① main motor ② main reducer ③ traveling motor ④ traveling reducer ⑤ electric control.
5.2. Ordering instructions
5.2.1. Indicate the model, material particle size, conveyor belt width, length of coal ditch (cross section of coal ditch is preferred), assembly form (left and right), and power receiving mode.
5.2.2. Qyg, myg and byg series products are used for single side coal ditch, and SyG series products are used for double side coal ditch.
5.2.3. All series of products are equipped with power receiving devices.
5.2.4. The machine can be operated locally or remotely (centralized control), and the remote operation device shall be ordered separately. Also need to undertake the non-standard design of various series of impeller coal feeder, if the user needs to contact the manufacturer.