PRODUCTS CENTER
Malta CSF type Toothed screening and cleaning machine
Category:
Product Description
CSF type toothed screen and trash remover
1. Introduction
1.1. Purpose
The tooth shaped screening and impurity removing machine is used to remove the stones, wood blocks, iron wire, woven fabric, gun line and other sundries in coal, so as to meet the grain size and quality requirements of the conveying and combustion systems. It has the functions of ensuring and improving the working efficiency and stable operation of the conveying and combustion systems. It is an ideal screening and impurity removal equipment for the conveying system, with high efficiency, convenient overhaul and maintenance Widely used in power, coal, metallurgy, chemical industry, port and other industries.
1.2. Model meaning
CSF-**
CSF -- toothed screen and trash remover
** -------- production capacity (T / h)
1.3. Structural features
1.3.1. The screening efficiency is high. The screen surface is composed of cross moving toothed sieve plates with large output per unit area and high screening efficiency.
1.3.2. Automatic cleaning and anti jam function. The two adjacent groups of toothed sieve plates have periodic Cross movement, which can remove the debris on the toothed plate mutually, ensure the screening efficiency and prevent the debris jam on the working face.
The layout is simple. The drive system adopts the front type layout, which does not conflict with the head drive of the conveyor. The fine material falling from the head drum and the sticky coal cleaned by the two-stage sweeper can enter the hopper smoothly without coal accumulation.
1.3.4. Strong adaptability. The clearance between the two groups of toothed sieve plates can be set or adjusted according to the requirements of different material granularity.
1.3.5. Good sealing performance. The integrated seal and the debris collection room at the tail of the machine can effectively prevent the dust leakage inside the machine and meet the requirements of environmental protection.
1.4. Working principle
The sieve surface of the toothed screen is composed of two groups of sieve plates. The materials that meet the requirements of system particle size fall into the lower system from the screen gap between the two groups of toothed sieve plates, and the debris left on the screen surface is transmitted to the tail and discharged through the staggered movement of two adjacent groups of toothed sieve plates.
2. Main technical parameters
See table 39-1 for the main technical parameters of CSF toothed screen and trash remover.
| Model | CSF300 | CSF500 | CSF800 | CSF1000 | CSF1200 | CSF1500 | CSF2000 |
| Capacity(t/h) | 300 | 500 | 800 | 1000 | 1200 | 1500 | 2000 |
| Motor power(KW) | 5.5 | 7.5 | 11 | 11 | 15 | 15 | 18.5 |
| suit belt wdith(mm) | 500~2000 | ||||||
3. Equipment appearance and structural dimensions
See Fig. 39-1 and table 39-2 for the outline and structural dimensions of CSF toothed screen and trash remover

Table 39-2 outline dimensions of CSF type gear screen and trash remover
| Belt width(mm) | 500 | 650 | 800 | 1000 | 1400 | 1600 | 2000 |
| A(mm) | 3560 | 3750 | 3900 | 4150 | 4300 | 4700 | 5000 |
| B(mm) | 2500 | 2600 | 2700 | 2800 | 3000 | 3100 | 3200 |
| C(mm) | 776 | 980 | 1176 | 1376 | 1780 | 1985 | 2375 |
Note: special design can be carried out according to different material characteristics and particle size requirements provided by users.
4. Scope of supply and ordering instructions
4.1. Scope of supply
Complete machine supply and supply according to customer requirements
4.2. Order requirements
After signing the contract:
4.2.1. According to the technical specifications, the company is responsible for design and production.
4.2.2. According to the requirements of the manufacturer, the staff shall conduct on-site investigation and design and production.
4.2.3. According to the agreement of both parties, the company can send accessories for free or free.