PRODUCTS CENTER
Malta ZS type Variable angle roller coal screening machine
Category:
Product Description
ZS (HGS) type variable inclination roller coal screen (Multi-Sine Screen)
1. Introduction
1.1. Scope of application
It is suitable for screening coal, coke, ore, limestone, etc. it is widely used in the conveying system of thermal power plant, and also widely used in metallurgy, chemical industry, building materials and coal system.
1.2. Model meaning
ZS-**##
ZS -- inclined roller coal screen
**-------Screen width (x 100m)
##-----Number of sieve shafts
1.3. Structural performance characteristics
1.3.1. The material on the screen surface is uniform, with equal thickness and high screening efficiency.
1.3.2. Single shaft drive, powerful power, single shaft maintenance without affecting the operation.
1.3.3. Each screen shaft is equipped with cleaning device, which is not easy to block the screen.
1.3.4. Low noise, small vibration and good sealing performance.
1.3.5. PLC program control, screen shaft can start with load in sequence.
1.3.6. It can realize centralized control and local operation.
1.4. Working principle
The inclined roller screen is composed of a certain number of special-shaped screen pieces set on several parallel shafts arranged according to a certain track. The screen shaft rotates in the same direction and at the same speed to form a rolling "banana" shaped screen surface. When the material flows on the screen surface, it can form a uniform thickness and certain acceleration material flow. Under the action of the rotating screen plate, the large material gradually moves forward and enters the crushing equipment, Small pieces of material are dropped into the sieve hopper through the screen hole to achieve the screening purpose.
2. Main technical parameters
See table 36-1 for main technical parameters of ZS type variable inclination roller coal screen
Table 36-1 main technical parameters of ZS variable inclination roller coal screen
| Model | sieve width | Capacity | partical output | screen efficiency | Motor power | General weight |
| (mm) | (t/h) | (mm) | (%) | (KW) | (kg) | |
| ZS-1006 | 1000 | 630 | ≤30 | 70 | 3 | 7170 |
| ZS-1009 | 1000 | 800 | ≤30 | 75 | 3 | 8970 |
| ZS-1011 | 1000 | 800 | ≤30 | 80 | 3 | 9890 |
| ZS-1409 | 1400 | 1000 | ≤30 | 80 | 3 | 11950 |
| ZS-1410 | 1400 | 1000 | ≤30 | 85 | 3 | 12410 |
| ZS-1412 | 1400 | 1200 | ≤30 | 90 | 3 | 15100 |
| ZS-1810 | 1800 | 1500 | ≤30 | 85 | 4 | 14720 |
| ZS-1812 | 1800 | 1800 | ≤30 | 90 | 4 | 16720 |
| ZS-2010 | 2000 | 2000 | ≤30 | - | 5.5 | 19700 |
| ZS-2012 | 2000 | 2200 | ≤30 | - | 5.5 | 21930 |
| ZS-2510 | 2000 | 2500 | ≤30 | - | 5.5 | 25540 |
| ZS-2514 | 2000 | 2800 | ≤30 | - | 5.5 | 27100 |
Note:
1. The moisture content of materials should be less than 15%.
2. The motor power in the table is common motor power, roller table motor can be configured according to coal quality and user requirements.
3. The reducer can be arranged on one side or on both sides according to the site conditions and user requirements.
4. The inclined rod screen is a multi angle screening equipment, and the screen surface angle can be optimized according to the coal quality and user requirements.
3. Main dimensions and structural dimensions
See Figure 36-1 for HGS1412 variable angle roller screen, 36-2 for HGS-1009 variable angle roller screen, 36-3 for HGS-1812 variable angle roller screen, and 36-4 for HGS-2012 variable angle roller screen




4. Scope of supply and ordering instructions
4.1. Scope of supply
1 main engine and 1 electric control cabinet
4.2. Ordering instructions
Please provide the model, installation form (left and right) and quantity.