Mozambique O type Rotary Wagon Tipper

O type Rotary Wagon Tippler

It adopts "O" end plate, frame link, roller support, hydraulic press, platform moving and leaning. There is a pusher on the platform, which can push out the empty car after the completion of tipping. The structure is simple, the overall rigidity is good, and the driving power is larger than the C-shaped rotor type. The three car and four car dumpers of the tripper and tripper are also of the O-type rotor type. The dumper can be divided into conventional "O" type rotor dumper and improved "O" type rotor dumper according to the structural characteristics of the body.

Model ZFJ-100 as sample.

Conventional "O" type rotor tipper

Adopt "O" end plate, frame connection, simple structure, good overall rigidity, high driving power, steel wire rope pressing car, platform moving and leaning car, the platform is equipped with a pusher, which can exit the empty car from the car dumper after tipping. It is suitable for heavy truck iron ox system or forearm extended heavy truck shunter system equipped with wire rope traction.

Performance parameters:

1. Type: fixed rotor type

2. Maximum load capacity: 100T

3. Rotor rotation angle: 170 °,

4. Rotor rotation speed: 1.185r/min

5. Roller diameter: φ 8140mm

6. Applicable vehicle weight (load): 30 ~ 60t

7. Height (from rail surface to top chord beam of vehicle wall): 1600 ~ 3500mm

8. Maximum travel of clamp: 1995mm

9. driving power (FC=40%): N=2x75kw

10. Reducer speed ratio i = 31.5

Improved "O" type rotor tipper

Make full use of the advantages of the overall rigidity of the end plate of the "O" type tipper, and improve it in combination with the "C" type tipper. The improved type adopts "O" end plate, fixed platform, hydraulic press car, hydraulic press car, driving power is reduced, press car and lean car are stable, safe and reliable. The original "O" type dumper can also be transformed into a fixed platform, with box girder connection, hydraulic car leaning, small reconstruction project and simple construction.

Performance parameters:

1. Type: fixed rotor type

2. Maximum load capacity: 100T

3. Rotor rotation angle: 170 °, maximum angle: 175 °

4. Rotor rotation speed:

High speed rotation of motor (1.226r. P.m);

At low speed (0.306r. P.m)

5. Clamp type: hydraulic (oil cylinder model: ggk1-100 / 56x1000)

6. Driving power (FC = 40%): n = 2x60kw