PRODUCTS CENTER
Papua New Guinea GGF series pipeline isolation valve
Product Description
GGF series pipeline isolation valve
1. Introduction
1.1. Purpose
GGF series pipeline isolation valve is mainly used for the switch valve between branch ash conveying pipelines or ash conveying main pipes of pneumatic ash conveying system in thermal power plant. The valve is pneumatic operation.
1.2. Model meaning
GGF-XX
GGF -- abbreviation of pipeline switching valve
XX -------- inlet and outlet diameter (mm)
1.3. Structural features
1.3.1. With patent technology, the valve structure is novel and unique, and the valve plate and valve seat are always in good sealing state under the elastic force. The service life of the valve is longer than that of similar products at home and abroad.
1.3.2. The valve is sealed with metal hard surface, which is operated pneumatically and quickly.
1.3.3. The valve plate and valve seat are made of metal materials without cooling water, and the working temperature can reach above 400 ℃.
1.3.4. The valve seat and valve plate are made of alloy tool steel with overall quenching treatment. The hardness under working condition is higher than HRC55, with good wear resistance and long service life.
2. Main technical parameters
The main technical parameters of GGF series pipeline isolation valve are shown in table 49-1.
Table 49-1 main technical parameters of GGF series pipeline isolation valve
| Model | GGF80 | GGF100 | GGF125 | GGF150 | GGF200 |
| Design pressure (MPa) | ≤1.0 | ||||
| Working pressure (MPa) | <0.5 | ||||
| Working temperature (℃) | ≤200 | ||||
| Controlling air source pressure (MPa) | 0.5~0.8 | ||||
3. Equipment appearance and structural dimensions
The equipment outline of GGF series pipeline isolation valve is shown in Fig. 49-1, and its structural dimensions are shown in table 49-2.

Table 49-2 structural dimensions of GGF series pipeline isolation valve
| Switching valve | GGF80 | GGF100 | GGF125 | GGF150 | GGF200 |
| Inlet/outlet flange specification | DN80 | DN100 | DN125 | DN150 | DN200 |
| PN1.0 | PN1.0 | PN1.0 | PN1.0 | PN1.0 | |
| ∮A(mm) | ∮80 | ∮100 | ∮125 | ∮150 | ∮200 |
| ∮B(mm) | ∮160 | ∮180 | ∮210 | ∮240 | ∮295 |
| ∮C(mm) | ∮200 | ∮230 | ∮250 | ∮285 | ∮340 |
| ∮D(mm) | ∮370 | ∮445 | ∮460 | ∮500 | ∮620 |
| ∮E(mm) | 104 | 130 | 139 | 159 | 208 |
| ∮F(mm) | 60 | 75 | 80 | 85 | 120 |
| ∮G(mm) | 80 | 112.6 | 130 | 114 | 137 |
| ∮H(mm) | 274 | 307 | 348 | 287 | 515 |
| ∮I(mm) | 332 | 372 | 412 | 385 | 622 |
| ∮J(mm) | 230 | 260 | 265 | 265 | 310 |
| ∮K(mm) | 432 | 492 | 497 | 497 | 645 |
| a(°) | 60 | 60 | 60 | 56 | 60 |
| n-∮d | 8-∮18 | 8-∮18 | 8-∮18 | 8-∮22 | 8-∮22 |
Note: n is the number of bolts.