全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Papua New Guinea ISW series horizontal centrifugal pump

Product Description

ISW series horizontal centrifugal pump

 

1. Introduction

1.1. Purpose

1.1.1. ISW pipeline centrifugal pump is used to transport clean water and other liquids with physical and chemical properties similar to that of clear water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden irrigation, fire-fighting pressurization and equipment matching, and the service temperature is t ≤ 80 ℃.

1.1.2. Iswr (WRG) hot water (high temperature) circulating pump is widely used in energy, metallurgy, chemical industry, textile, papermaking, hotels and restaurants, etc. The operating temperature of iswr is t ≤ 120 ℃, and that of WRG is t ≤ 240 ℃

1.1.3. Iswh type horizontal chemical pump is used to transport liquid without solid particles, corrosive and viscosity similar to water. It is suitable for petroleum, chemical, metallurgy, electric power, papermaking, food, pharmaceutical and synthetic fiber departments. The service temperature is - 20 ~ 120 ℃

1.1.4. Iswb horizontal oil pump is used to transport gasoline, diesel oil, kerosene and other petroleum products. The operating temperature T is - 20 ~ + 120c.

1.2. Model meaning

ISW-100-160-(Ⅰ)-AB

ISW -- horizontal centrifugal pump

100 -------- pump inlet and outlet nominal diameter (mm)

160 -------- nominal diameter of impeller (mm)

I -------- flow classification

AB------The impeller is cut by the second and second time

 

2. Main technical parameters

The working condition parameters and performance parameters of ISW series horizontal centrifugal pump are shown in table 41-1 and table 41-2 respectively.

Table 41-1 working condition parameters of ISW series horizontal centrifugal pump

technical characteristics Working condition parameters Remarks
Suction pressure (MPa) ≤1.0 —
Maximum working pressure of pump system (MPa) ≤1.6 The working pressure of the system should be indicated when ordering
Pump static pressure test pressure (MPa) 2.5 —
Ambient temperature (℃) <40 —
Relative humidity (%) <95 —
Volume content of solid particles in conveying medium Not more than 0.1% of unit volume If the medium used is with fine particles, it should be stated when ordering

 

Table 41-2 performance parameters of ISW series horizontal centrifugal pump

Code Model Flow Flow Lift Efficiency Speed Motor power NPSH
(m3/h) (L/s) (m) (%) (r/min) (kW) (m)
1001 15-80 1.1 0.3 8.5 26 2800 0.18 2.5
1.5 0.42 8 34
2 0.55 7 34
1002 20-110 1.8 0.5 16 19 2800 0.37 2.5
2.5 0.69 15 34
3.3 0.91 13.5 35
1003 20-160 1.8 0.5 33 19 2800 0.75 2.5
2.5 0.69 32 25
3.3 0.91 30 23
1004 25-110 2.8 0.78 16 34 2900 0.55 2.5
4 1.11 15 42
5.2 1.44 13.5 41
1005 25-125 2.8 0.78 20.6 28 2900 0.75 2.5
4 1.11 20 36
5.2 1.44 18 35
1006 25-125A 2.5 0.69 17 35 2900 0.75 2.5
3.5 0.97 16
4.5 1.25 14
1007 25-160 2.8 0.78 33 24 2900 1.5 2.5
4 1.11 32 32
5.2 1.44 30 33
1008 25-160A3 2.5 0.69 29 31 2900 1.1 2.5
3.5 0.97 28
4.5 1.25 26
1009 32-125 4.5 1.25 20.5 29 2900 0.75 2.5
4 1.39 20 38
6.5 1.58 18 38
1010 32-125A 3.3 1.22 17 37 2900 0.75 2.5
4.5 1.75 16
5.7 2.31 14
1011 40-100 4.4 1.11 13.2 48 2900 0.55 2.5
6.3 1.53 12.5 54
8.3 1.94 11.3 53
1012 40-100A 4 1.22 10.6 47 2900 0.37 2.5
5.5 1.75 10 52.6
7 2.31 9 54
1013 40-125 4.4 1.11 20.5 36 2900 1.1 2.5
6.3 1.53 20 46
8.3 1.94 18.5 43
1014 40-125A 4 1.22 16.3 40 2900 0.75 2.5
5.5 1.75 16 44
7 1.94 15.5 42.5
1015 40-160 4.4 1.22 33.2 34 2900 2.2 2.5
6.3 1.75 32 40
8.3 2.31 30.2 42
Code Model Flow Flow Lift Efficiency Speed Motor power NPSH
(m3/h) (L/s) (m) (%) (r/min) (kW) (m)
1016 40-160A 4 1.11 29 33 2900 1.5 2.5
5.5 1.53 28 38
7 1.94 26.6 39
1017 40-160B 3.5 0.97 25 31.5 2900 1.1 2.5
5 1.39 24 37
6.5 1.8 22.5 39
1018 40-200 4.4 1.22 50.5 26 2900 4 2.5
6.3 1.75 50 33
8.3 2.31 48 35
1019 40-200A 4 1.11 44.6 26 2900 3 2.5
5.5 1.53 44 31
7 1.94 42.7 32
1020 40-200B 3.5 0.97 39 29 2900 2.2 2.5
5 1.39 38
6.5 1.8 36
1021 40-250 4.4 1.22 82 24 2900 7.5 2.5
6.3 1.75 80 27.5
8.3 2.31 74 28
1022 40-250A 4 1.11 72.5 24 2900 5.5 2.5
5.5 1.53 70 26
7 1.94 65 24.5
1023 40-250B 3.5 0.097 63 25 2900 4 2.5
5 1.39 60
6.5 1.8 55
1024 40-100(Ⅰ) 8.8 2.44 13.6 55 2900 1.1 2.5
12.5 3.47 12.5 62
16.3 4.53 11.3 60
1025 40-100(Ⅰ)A 8 2.22 10.5 60 2900 0.75 2.5
11 3.05 10
14 3.89 9
1026 40-125(Ⅰ) 8 2.44 21.5 49 2900 1.5 2.5
12.5 3.05 20 58
16.3 3.89 17.8 58
1027 40-125(Ⅰ)A 8 2.22 17 56 2900 1.1 2.5
11 3.05 16
14 3.89 14.3
1028 40-160(Ⅰ) 8.8 2.44 33.3 45 2900 3 2.5
12.5 3.47 32 52
16.3 4.53 29.8 53
1029 40-160(Ⅰ)A 8 2.22 29 43 2900 2.2 2.5
11 3.05 28 48
14 3.89 26.2 47