PRODUCTS CENTER
Papua New Guinea Air cannon
Product Description
Air cannon
1. Introduction
1.1. Purpose
The air cannon plug remover is a special device to prevent and eliminate the material arching and blocking in the chute and slope of various types of silos, hoppers, cement preheater kilns and pipeline bifurcations, mine chute and slope. The bin and bucket made of concrete, steel, wood or plastic can be used. Air cannon is widely used in coal mine, underground coal bunker, coal washing plant, cement plant, foundry, thermal power plant, sintering plant, gas plant, chemical fertilizer plant, chemical plant, aluminum plant, alkali plant, steel plant, coking plant, pharmaceutical plant, mine, wharf, grain, feed processing plant, concrete processing plant and other factories and enterprises with silo, hopper, transmission pipeline and mine chute.
1.2. Features
1.2.1. Safety. The air cannon plug remover is designed and manufactured in accordance with the national standards for containers. Because the air jet in the container is instantaneous and the amount of air used each time is limited, it will not produce large vibration and impact on the wall of the bin and bucket. There is no explosion hazard to surrounding medium by using non spark switch.
1.2.2. High energy. The air cannon plug remover uses the air impact force produced by the sudden explosion of gas stored in the air storage tank to directly act on the material blocking accident area to break the arch and clear the blockage and assist the flow.
1.2.3. Low energy consumption. Because the air cannon plug remover works intermittently and the time of filling is short each time, the energy consumption of the device is lower than that of other devices.
1.2.4. Low noise. The sound of compressed air released by expansion is almost all absorbed by the materials in the warehouse, and it works intermittently, so the noise is lower than the noise health standard of industrial enterprises.
1.3. Working principle
The plug remover of air cannon directly rushes into the block accident area where bulk materials are stored at the speed of more than 1 Mach or higher than the speed of sound with the strong airflow of compressed air suddenly ejected. The sudden release of expansion shock wave overcomes the static friction of materials and makes the materials in the bin recover gravity flow again.
2. Equipment appearance and main technical parameters
See figure 38-1 for equipment outline of air cannon and table 38-1 for main technical parameters.

Table 38-1 main technical parameters of air cannon (1)
| Model | Volume | Inner diameter | Spout | A | B | C | Working pressure | Impact force | Power | Weight |
| (L) | (mm) | (mm) | (mm) | (mm) | (mm) | (MPa) | (N) | (W) | (kg) | |
| KZ-50-K | 50 | 350 | 50 | 578 | 250 | 350 | 0.4~0.8 | 1400~4200 | 10.5 | 58 |
| KZ-60-K | 60 | 350 | 65 | 688 | 360 | 460 | 2000~4600 | 70 | ||
| KZ-75-K | 75 | 400 | 660 | 310 | 410 | 2300~6400 | 81 | |||
| KZ-100-K | 100 | 400 | 860 | 510 | 610 | 2600~8000 | 95 | |||
| KZ-120-K | 120 | 450 | 920 | 600 | 700 | 3300~8700 | 120 | |||
| KZ-150-K | 150 | 500 | 882 | 460 | 570 | 4500~10000 | 130 | |||
| KZ-170-K | 170 | 500 | 982 | 560 | 670 | 4850~11000 | 145 | |||
| KZ-200-K | 200 | 500 | 1080 | 730 | 830 | 5200~12800 | 165 |
Table 38-2 main technical parameters of air cannon (2)
| Model | Volume | A | B | C | ∮D | E | F | ∮G | ∮H | ∮ | K | Working pressure (MPa) | Impact force | Explosive energy | Weight | |
| (L) | (mm) | (mm) | (mm) | (mm) | (mm) | Injector (mm) | hanging ring (mm) | center distance (mm) | air inlet (in) | (N) | (N.m) | (kg) | ||||
| E1 | E2 | |||||||||||||||
| (mm) | (mm) | |||||||||||||||
| KL-14 | 14 | 535 | 290 | 400 | 219 | 280 | 65 | 50 | 14 | 125 | 1/2 | 0.4~0.8 | 950~2940 | 1940 | 28 | |
| KL.30 | 30 | 610 | 375 | 480 | 312 | 330 | 70 | 50 | 14 | 125 | 1/2 | 0.4~0.8 | 1176~3720 | 4080 | 35 | |
| KL-50 | 50 | 700 | 430 | 568 | 362 | 400 | 70 | 50 | 14 | 125 | 1/2 | 0.4~0.8 | 1370~4100 | 6800 | 43 | |
| KT-75-D | 75 | 980 | 486 | 680 | 412 | 365 | 165 | 185 | 100 | 16 | 180 | 1/2 | 0.4~0.8 | 2500~6500 | 10200 | 90 |
| KT-100-D | 100 | 1170 | 486 | 870 | 412 | 480 | 200 | 185 | 100 | 16 | 180 | 1/2 | 0.4~0.8 | 3000~8000 | 13600 | 110 |
| KT-150-D | 150 | 1190 | 580 | 890 | 512 | 560 | 225 | 185 | 100 | 18 | 180 | 1/2 | 0.4~0.8 | 4500~10000 | 20400 | 130 |
| KT-300-D | 300 | 1500 | 680 | 1185 | 612 | 685 | 260 | 190 | 125 | 18 | 210 | 1/2,1 | 0.4~0.8 | 5500~12500 | 40800 | 195 |
| KT-500-D | 500 | 1745 | 790 | 1420 | 712 | 870 | 285 | 190 | 125 | 18 | 210 | 1/2,1 | 0.4~0.8 | 6500~15000 | 68000 | 230 |