全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Papua New Guinea DN2200 medium pressure high speed mixed ion exchanger

Product Description

DN2200 medium pressure high speed mixed ion exchanger

 

1. Introduction

1.1 purpose

High speed mixed ion exchanger is used in condensate polishing system of power plant. The equipment is equipped with strong acid cation resin and strong alkali anion resin and mixed evenly, which can effectively remove trace dissolved substances and solid particles in condensate water.

1.2 model significance

                            JHGS220-3.8

                            J --- ion exchange

                            H -- mixed bed

                            GS -- high speed

                            220 -------- nominal diameter of equipment (mm)

                            3.8 -------- resin volume (M3)

1.3 structural features

1.3.1. Radial branch pipe form for water inlet device.

1.3.2. The water outlet device is disc-shaped orifice plate with stainless steel water cap.

1.3.3. The inner surface of the equipment is lined with rubber for anti-corrosion.

 

2. Technical parameters

2.1 main technical parameters

The main technical parameters of DN2200 medium pressure high speed mixed ion exchanger are shown in table 59-1

Table 59-1 main technical parameters of DN2200 medium pressure high speed mixed ion exchanger

Item Data Item Data
Design pressure(MPa) 3.5 container form Vertical
Design temperature(℃) 60 Welded joint coefficient 0.85
Design flow rate (m/h) 100 material of the main body 16MnR
Catio resin : Anion resin 1:1 Equipment weight (kg) 8570
Resin volume (m3) 3.8 Running load (N) 22000
Design  capacity (t/h) 380    

2.2. Special parameters

2.2.1. The flow rate is 90-120m / h.

2.2.2. The effluent conductivity is less than 0.2us/cm

 

3. Equipment appearance and structural dimensions

The outline structure of DN2200 medium pressure and high speed mixed ion exchanger is shown in Figure 59-1

 

4. Ordering instructions

The proportion of resin can be determined according to the process system. Please indicate the proportion of resin when ordering.