全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Papua New Guinea Anion resin regeneration tower (ART)

Product Description

Anion resin regeneration tower (ART)

 

1. Introduction

1.1. Purpose

Anion resin regeneration tower is used for condensate polishing in vitro regeneration system. The anion resin separated from the resin separation tower is sent to the equipment for cleaning and thorough regeneration.

1.2. Model meaning

                        JZY•160

                       J --- ion exchange

                       Z -- Regeneration

                       Y -- anion resin

                      160 -- equipment diameter (mm)

1.3. Structural features

1.3.1. The water inlet device is arc-shaped water baffle.

1.3.2. The alkali inlet device is in the form of main branch pipe, and the branch pipe is covered with trapezoidal wire winding.

1.3.3. The water outlet device is a porous plate with a double speed water cap.

1.3.4. The equipment is lined with 1751 semi-rigid rubber.

1.4. Product series

See table 53-1 for the product series of anion resin regeneration tower.

Table 53-1 anion resin regeneration tower product series

Nominal meter (mm)
Model
Item
DN1200 DN1600 DN2000
JZY120 JZY160 JZY200
Resin volume(m3) 1. 90 4.6 7.2
Design weight(kg) 1800 2390 4500
Running load(N) 15 000 20000 32000
Typical application(MW) 300 600、1000 1000、CPR1000

 

2. Technical parameters

The main technical parameters of anion resin regeneration tower are shown in table 53-2.

Table 53-2 main technical parameters of anion resin regeneration tower

Item Data Item Data
Design pressure(MPa) 0.6 Backwash expansion rate  100%
Design temperature(℃) 50 Welded joint coefficient 0.85
material of the main body Q235-B container form Vertical

 

3. Equipment appearance and structural dimensions

The external structure of anion resin regeneration tower is shown in Fig. 53-1, table 53-3 and table 53-4

Table 53-3 external dimensions of anion resin regeneration tower (mm)

Nominal diameter

Item
DN1200 DN1600 DN2000
H 5070 5900 6470
H1 1025 1340 1295
H2 3580 4015 4540
H3 1870 2600 2880
H4 1770 2300 2780
H5 590 743 640
L 765 960 1150
L1 230 305 366
∮ 790 1050 1310

 

Table 53-4 orifice table of anion resin regeneration tower  (mm)

Nozzle Code Usage Nominal dimensions
DN1200 DN1800 DN2000
N1 Exhause port 40 50 50
N2 water inlet 80 80 80
N3 Resin outlet 80 80 80
N4 water outlet 80 80 80
N5 Resign inlet 80 80 80
N6 Regeneration fluid inlet 50 65 65
N7~N10 Mirror 140×40 140×40 140×40
N11 Top hole 450 450 450
N12 side hole 500 500 500