全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Papua New Guinea Prefilter (tubular filter)

Product Description

Prefilter (tubular filter)

 

1. Introduction

1.1 purpose

Polypropylene fiber foldable filter element is installed in the prefilter. According to the pore size of different filter elements, the impurities of solid particles with different particle sizes in water can be removed. The equipment is mainly used in condensate polishing system because of its large capacity. At present, more and more units with capacity of 600 MW and above have high quality requirements for water and steam quality during operation of these supercritical or ultra supercritical units. A pre filter is installed in front of the mixed bed unit to remove the impurity particles with iron oxide as the main component in the system. When the iron content is less than 2000 UG / L (the maximum can be 4000 UG / L), the prefilter can be put into operation in advance, and the iron removal efficiency can reach more than 80%.

1.2 model significance

                       GYL170

                       G --- filtration

                       Y ------ pressure type

                        L -------- filter element

                        170 --- equipment diameter mm

1.3 structural features

1.3.1. The bottom water inlet device is baffle water distribution device.

1.3.2. The bottom water outlet device is in the form of porous filter element.

1.3.3. All polypropylene fiber folded filter elements are fixed on the lower porous plate.

1.3.4. Epoxy resin anti-corrosion coating is used for internal surface of equipment.

1.3.5. The pressure grade of interface flange is pn3.5

1.4 product series

See table 45-1 for prefilter product series

Table 45-1 main product series of prefilter

Nominal diameter DN1600 DN1700 DN1800 DN2000
Model GYL160 GYL170 GYL180 GYL200
filter elment flux(m3/h) 3.5~4.5 3.5~4.5 3.5~4.5 3.5~4.5
No. of filter element(PCS) 180 225 300 400
Desgin capacity(t/h) 630 787 1050 1400
Design weight(kg) 6200 7424 7830 8858
Running load(N) 18000 19000 20000 21000
Typical application(MW) 300 300 600 1000
600 1000

 

2. Technical parameters

The main technical parameters of prefilter are shown in table 45-2

Design pressure(MPa) 3.5-5.0 Filtration accuracy (um) Foldable
Design temperature(℃) 60 Filter element form Q235-B
Welded joint coefficient 1 Filter element flux (m3/h) 3.5-4.5
material of the main body Q345R container form Vertical

Note: the filter elements used are based on graver products.

 

3. Equipment appearance and structural dimensions

The configuration of prefilter is shown in Fig. 45-1 and table 45-3

Nominal diamter

Item
DN1600 DN1700 DN1800 DN2000
H 4650 4490 4920 4920
h 500 500 500 500
∮ 1650 1760 1860 2060
L1 500 500 500 580
L2 500 500 500 600
L3 500 500 500 600
N1 DN250 DN300 DN300 DN400
N2 DN250 DN300 DN300 DN400
N3 DN450 DN500 DN500 DN500
N4 DN100 DN100 DN100 DN100
N5 DN100 DN100 DN100 DN100
N6 DN500 DN500 DN500 DN500
N7 DN100 DN100 DN100 DN100