PRODUCTS CENTER
Sri Lanka 2SB3 series straight stroke electric actuator
Category:
Product Description
2SB3 series straight stroke electric actuator
1. Introduction
1.1. Purpose
2SB3 series straight stroke electric actuator is composed of 2SA3 and straight stroke components. It outputs linear motion and is suitable for gate valve, globe valve and diaphragm valve.
1.2. Model meaning
Code Position 5 67 8 9 10 11 12 13 14 15 16
2SB3 ** ## - $$ @@ && ** ※※ - §§ ¢¢ ☆☆ □□ +Z additional special selection code
Code of 2SB3 --- 2SB3 series straight stroke electric actuator
**----------Executive machinery series (Code position 5)
##------------Frame number and torque grading (Code position 6,7)
$$--- output connection form (Code position 8)
@@------------------Output shaft speed (Code position 9)
&&---------------------Motor (Code position 10)
**-------------Motor thermal protection (Code position 11)
※※---------Protection sleeve of valve stem (Code position 12)
§§---------Power control unit (Code position 13)
¢¢------Signal components (Code position 14)
☆☆-------Switch and signal contact (Code position 15)
□□---------Wiring mode (Code position 16)
1.2.1. Selection of actuator series (code position 5)
0: S series, namely 2SB30 series electric actuator.
5: R series, namely 2SB35 series electric actuator.
1.2.2. See table 60-1 to table 60-4 for the frame number and thrust classification (code positions 6 and 7).
1.2.3. Output connection form (code position 8)
1: No bracket, according to GB12222
2: No bracket, other non-standard special connection forms.
3: There's a bracket.
1.3. Structural features
2SB3 is formed by the combination of 2SA3 and straight stroke components, which can convert the multi rotation motion of 2SA3 output into up and down linear motion.
2. Main technical parameters and product appearance
2.1. Main technical parameters (see table 60-1 ~ table 60-4)
Table 60-1 technical parameters of S Series (i.e. 2SB30 Series) (I Series)
| Code position 6, 7 | Control thrust(KN) | Output speed(mm/min) | Stroke(mm) | Connection dimensions |
| 11 | 4~6 | 25 (A) 35 (B) 50 (C) 70 (D) 100 (E) |
50 (A) 100 (B) 200 (C) 400 (D) |
F07, F10 |
| 12 | 8~12 | |||
| 21 | 15~20 | 30 (A) 42 (B) 60 (C) 84 (D) 120 (E) |
63 (A) 125 (B) 250 (C) 400 (D) |
|
| 22 | 25~40 | F14 | ||
| 31 | 50~63 | 35 (A) 49 (B) 70 (C) 98 (D) 140 (E) |
80 (A) 160 (B) 320 (C) 400 (D) |
F14 |
| 41 | 150~220 | 40 (A) 56 (B) 80 (C) 112 (D) 160 (E) |
100 (A) 200 (B) 400 ( C) |
F16 |
Note: the output thrust of 2SB30 series electric actuator is generally implemented in the first output thrust series, and it can be implemented according to table 60-2 in case of special requirements, but the optional code - Y01 must be added to the model
Table 60-2 technical parameters of S Series (i.e. 2SB30 Series) (II Series)
| Code position 6, 7 | Control thrust(KN) | Output speed(mm/min) | Stroke(mm) | Connection dimensions |
| 12 | 10~28 | 25 (A) 35 (B) 50 (C) 70 (D) 100 (E) |
50 (A) 100 (B) 200 (C) 400 (D) |
F10 |
| 22 | 25~80 | 30 (A) 42 (B) 60 (C) 84 (D) 120 (E) |
63 (A) 125 (B) 250 (C) 400 (D) |
F14 |
Table 60-3 technical parameters of R series (i.e. 2SB35 Series) (I Series)
| Code position 6, 7 | Control thrust(KN) | Output speed(mm/min) | Stroke(mm) | Connection dimensions |
| 11 | 6~8 | 25 (A) 35 (B) 50 (C) 70 (D) 100 (E) |
50 (A) 100 (B) 200 (C) 400 (D) |
F07, F10 |
| 12 | 12~15 | |||
| 21 | 20~25 | 30 (A) 42 (B) 60 (C) 84 (D) 120 (E) |
63 (A) 125 (B) 250 (C) 400 (D) |
F10 |
| 22 | 40~50 | |||
| 31 | 63~100 | 35 (A) 49 (B) 70 (C) 98 (D) 140 (E) |
80 (A) 160 (B) 320 (C) 400 (D) |
F14 |
| 32 | 100~150 | 40 (A) 56 (B) 80 (C) 112 (D) 160 (E) |
100 (A) 200 (B) 400 ( C) |
F16 |
Note: the output thrust of 2SB35 series electric actuator is generally implemented in the first output thrust series, and it can be implemented according to table 60-4 when special requirements are met, but the optional code - Y01 must be added to the model
Table 60-4 technical parameters of R series (i.e. 2SB35 Series) (II Series)
| Code position 6, 7 | Control thrust(KN) | Output speed(mm/min) | Stroke(mm) | Connection dimensions |
| 11 | 4~6 | 25 (A) 35 (B) 50 (C) 70 (D) 100 (E) |
50 (A) 100 (B) 200 (C) 400 (D) |
F07, F10 |
| 12 | 8~12 | |||
| 21 | 15~20 | 30 (A) 42 (B) 60 (C) 84 (D) 120 (E) |
63 (A) 125 (B) 250 (C) 400 (D) |
|
| 22 | 25~40 | F10 | ||
| 31 | 50~63 | 35 (A) 49 (B) 70 (C) 98 (D) 140 (E) |
80 (A) 160 (B) 320 (C) 400 (D) |
F14 |
| 41 | 150~220 | 40 (A) 56 (B) 80 (C) 112 (D) 160 (E) |
100 (A) 200 (B) 400 ( C) |
F16 |
2.2. Product appearance
The outline and structural dimensions of 2SB3 series straight stroke electric actuators are shown in Fig. 60-1 ~ Fig. 60-4 and table 60-5 ~ table 60-8.


Table 60-5 outline dimension of 2SB3 series straight stroke electric actuator mm
| Model | 2SB3011、2SB3511 | 2SB3012、2SB3512 | ||||||
| Stroke | 50 | 100 | 200 | 400 | 50 | 100 | 200 | 400 |
| H1 | 307 | 357 | 457 | 657 | 287 | 337 | 437 | 637 |
Table 60-6 dimensions of 2SB3.2 series straight stroke electric actuators mm
| Model | 2SB3021、2SB3521 | 2SB3022、2SB3522 | ||||||
| Stroke | 63 | 125 | 250 | 400 | 80 | 160 | 320 | 400 |
| H1 | 309 | 371 | 496 | 646 | 416 | 496 | 656 | 736 |
Table 60-7 dimensions of 2SB3.3 series straight stroke electric actuators mm
| Model | 2SB3031、2SB3531 | 2SB3032、2SB3532 | |||||
| Stroke | 80 | 160 | 320 | 400 | 100 | 200 | 400 |
| H1 | 800 | 880 | 1040 | 1120 | 496 | 596 | 796 |
Table 60-8 dimensions of 2SB3 series straight stroke electric actuator mm
| Model | d1 | d2 | d3 | n-d4 | d8 | H2 | H3 | H4 |
| 2SB3011, 2SB3511 | 90 | 55 | 70 | 4-M8 | M16×1.5 | 3 | 49 | 25 |
| 2SB3012, 2SB3512 | 125 | 70 | 102 | 4-M10 | M16×1.5 | 3 | 49 | 25 |
| 2SB3021, 2SB3521 | 125 | 70 | 102 | 4-M10 | M20×1.5 | 3 | 54 | 30 |
| 2SB3022, 2SB3522 | 175 | 100 | 140 | 4-M16 | M36×3 | 4 | 74 | 55 |
| 2SB3031, 2SB3531 | 175 | 100 | 140 | 4-M16 | M36×3 | 4 | 74 | 55 |
| 2SB3032, 2SB3532 | 210 | 130 | 165 | 4-M20 | M42×3 | 5 | 90 | 65 |