PRODUCTS CENTER
Product Description
Full safety valve
1. Introduction
1.1. Purpose
The full safety valve can be used as a matching valve for 300 and 600 MW boilers.
1.2. Structural features
The full volume safety valve has the advantages of large discharge coefficient, accurate opening pressure, small opening and closing pressure difference, good sealing and convenient adjustment
1.2.1. Nozzle seat. Based on the principle of Laval nozzle, the steam velocity at the outlet of valve seat is supersonic and the discharge coefficient is large. The sealing surface of the valve seat is plasma spray welded with cobalt based cemented carbide, which is wear-resistant, erosion resistant and has long service life.
1.2.2. The valve disc adopts the thermal stress compensation structure, which is divided into two parts, namely the valve disc and the hot valve disc. The purpose is to make full use of the thermal deformation of the valve disc to achieve sealing; the hot valve disc is made into a tongue structure, so as to use its tiny elastic effect to prevent leakage.
1.2.3. Down regulation. An annular space is formed between the down regulating ring and the lower plane of the valve disc. The space is adjusted by the down regulating ring to obtain the appropriate opening pressure.
1.2.4. Up regulation. The function of the adjusting ring is to change the direction of the fluid discharged from the valve seat, so as to change the reaction force of the fluid on the disc. The position of adjusting ring directly affects the opening and closing pressure difference of valve.
1.2.5. Cooler. The cooler separates the valve body from the spring to reduce the heating effect of the spring, so that the temperature of the spring does not exceed 200 ℃, ensure the stiffness of the spring and stabilize the performance of the spring.
1.2.6. Adjusting sleeve. The adjusting sleeve is mainly used to adjust the back pressure of the valve, and the lower cone and the exhaust chamber form an adjusting body. When the adjusting sleeve is up, the back pressure of the valve decreases; when the adjusting sleeve is down, the back pressure of the valve increases.
1.2.7. Spring. Spring is the key part to determine the performance of safety valve. Different springs are designed for different setting pressure and opening closing pressure difference.
1.2.8. The contact between the valve stem head and the disc cushion block is overlaid with cobalt based carbide, with high hardness, wear resistance and long service life.
2. Main technical parameters (see table 46-1)
Table 46-1 main technical parameters of full safety valve
| Item | Parameter |
| Nominal (working) pressure range(MPa) | PN6.4~PN32(Class600~Class2500) |
| Operating temperature range(℃) | 427~610(800~1130℉) |
| Nominal size range (mm) | DN25~DN200(1~6in) |
| Connection mode | Flange or welding |
| Valve body material | WCB, WCC, C12A, WC9, WC6, ZG20CrMoV, CF8, 25, SA105, 12Cr1Mo1V, F91, F22, F304, F316, F21 |