全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Tanzania Pipes with rubber lining or plastic lining

Product Description

1. Introduction:

Pipeline is used for medium transportation. Seamless steel pipe, fluid pipe and spiral pipe can be selected according to the needs

 

2. Technical parameters:

2.1. Working pressure: the same as the system

2.2. Working temperature: the same as the system

Specification: DN20 ~ DN2000, all kinds of standard and grade flange

2.4. Material: carbon steel, carbon steel Village glue, carbon steel Village plastic, plastic pipe, etc

 

3. Technological dimension of rubber and plastic lining of pipeline:

 

3.1.  Elbow

3.1.1. For the elbow with pipe diameter less than DN200, the elbow with r = 1.5dn is generally used, and the finished product size is a = 1.5dn + 5mm (5mm is the thickness of rubber lining and plastic lining, 3mm + welding height, 2mm);

3.1.2. For elbows with pipe diameter greater than or equal to DN250, r = 1.0dn or 1.5dn elbows with size a = 1.0dn/1.5dn + 5mm shall be used.

 

3.2. Pipe lining length

3.2.1. The rubber lining length of DN50 pipeline shall not exceed 1500mm.

3.2.2. The rubber lining length of dn65-dn80 pipeline shall not exceed 2000mm.

3.2.3. The rubber lining length of DN 100-dn 125 pipeline shall not exceed 3000 mm.

3.2.4. The rubber lining length of DN 150-dn 250 pipe shall not exceed 4000 mm.

3.2.5 the rubber lining length of DN300 ~ 400 pipeline shall not exceed 5000mm.

3.2.6. The rubber lining length of pipes above dn450 shall not exceed 5000mm.

3.3. Tee

3.3.1. The size of TEE can be 1.5dn + 5mm.

3.3.2. Ensure that the flange does not touch the flange or has welding allowance: the minimum distance between the bottom of the flange and the pipe plane is 80mm.

 

3.4. If there are branch pipes on the pipe section:

3.4.1. The length of branch pipe within DN25 shall not exceed 150 mm

3.4.2. The length of branch pipe DN32 ~ 50 shall not exceed 200 mm

3.4.3. The length of branch pipe DN65 ~ 100 shall not exceed 400mm

3.4.4. The length of branch pipe above DN 125 shall not exceed 500 mm

3.4.5. The distance between the branch pipe and the main pipe should be within 500mm.