PRODUCTS CENTER
Tanzania PZG Series Steel ejector
Category:
Product Description
PZG Steel ejector
1. Introduction
1.1 purpose
The ejector is a kind of equipment that sucks and ejects another kind of low-pressure fluid by the negative pressure produced by the high-pressure fluid (generally water) formed by the nozzle, and has the mixing function. The steel injector is mainly used to dilute and transport alkali regeneration liquid.
1.2 model significance
PZG3.9
P -------eject
Z -- Regeneration
G -------- steel
3.9 -------- eject volume (T / h)
1.3 product series
See table 37-1 for main product series of steel ejector
Table 37-1 main product series of steel ejector
| Diameter of matching ion exchanger(mm) | 1000 | 1500 | 2000 | 2500 | 3000 | |
| Injection volume(t/h) | 3.9 | 8.9 | 15.7 | 24.6 | 35.4 | |
| Structure dimensions | A (mm) | 120 | 140 | 180 | 180 | 180 |
| B (mm) | 82.5 | 117.5 | 175.5 | 165.5 | 207 | |
| C (mm) | 334 | 482 | 679 | 725 | 724 | |
| Flange joint | DN1 (mm) | 25 | 25 | 32 | 40 | 50 |
| DN2 (mm) | 50 | 65 | 100 | 100 | 125 | |
| DN3 mm) | 50 | 65 | 100 | 100 | 125 | |
| Weight(kg) | 8.5 | 14 | 35 | 35.9 | 60 | |
2. Technical parameters
The main technical parameters of steel ejector are shown in table 37-2
| Item | Data | Item | Data |
| Inlet water pressure(MPa) | >0.1 | Suction chamber vacuum (MPa) | 0.03 |
| inlet water temperature(℃) | 20-30 | inlet chemical concentration (%) | 30 |
| Outlet water pressure (MPa) | 0.15 | outlet chemical concentration (%) | 4 |
3. Equipment appearance and structural dimensions
The outline structure of steel ejector is shown in Fig. 37-1 and table 37-1
