PRODUCTS CENTER
Zimbabwe ST series Cantilever Stacker
Category:
Product Description
ST series cantilever stacker
1. Introduction
1.1. Purpose
The stacker is suitable for large and medium-sized thermal power plants, port terminals, iron and steel plants, coking plants, mines and other industrial and mining enterprises. It is an ideal and efficient machine for continuous stacker operation of bulk materials with particle size no more than 300 mm.
The stacker is installed on the track arranged along the stock yard to complete the work of stacking the system incoming materials to the stock yard.
1.2. Model meaning
ST **** .##
St ------ cantilever stacker
****---------Rated stacking capacity (T / h)
##-----------------Turning radius (m)
1.3. Structural characteristics
Stacker is composed of rotary mechanism, cantilever belt conveyor, pitching mechanism, traveling mechanism, tailstock, metal steel structure, lubrication system, electrical room and electrical control system. The slewing support has many forms, such as slewing big bearing and slewing trolley; the pitching mechanism has two forms, i.e. mechanical luffing of winch wire rope and pitching of hydraulic cylinder; three operation modes, i.e. local, manual and semi-automatic, can be adopted.
1.4. Working principle
Stacking: materials from the system are piled into the stock yard through tailstock, blanking device and cantilever belt conveyor.
2. Main technical parameters
See table 25-1 for main technical parameters of ST series arm stacker.
Table 25-1
| Model | Rated reclaimer capacity (t/h) | Rotary Radius(m) | Track span | Stacking height(m) | Max. wheel Pressure | Suggested Track | |
| (m) | Up track | Down track | (KN) | ||||
| TBS2000·29 | 2000 | 29 | 7 | 11.55 | 0.45 | 300 | QU80 |
| ST1300·28 | 1300 | 28 | 7 | 11.8 | 1.2 | 250 | P50 |
| ST1000·32 | 1000 | 32 | 6 | 12 | 1 | 250 | P50 |
| ST2400·39.6 | 2400 | 39.6 | 8 | 15 | 1.8 | 250 | P50 |
| ST2600·41 | 2600 | 41 | 7 | 15.3 | 1.7 | 250 | P50 |
| ST4000·44 | 4000 | 44 | 6 | 15 | 2 | 250 | P50 |
| ST5500·45 | 5500 | 45 | 8 | 10 | 0.5 | 250 | P50 |
3. Equipment outline and structural dimension
See Figure 25-1 for double cantilever stacker (main winch pitch); see figure 25-2 for cantilever stacker (main hydraulic pitch, turning radius not less than 40m, capacity not less than 3000t / h); see figure 25-3 for cantilever stacker (main hydraulic pitch, turning radius not more than 40m, capacity not more than 3000t / h).


4. Scope of supply and ordering instructions
4.1. Scope of supply
The basic scope of supply is to provide a complete set of stacker.
The stacker body above the track tread includes mechanical part, electric control part and ground anchor seat, terminal stop, ground junction box of upper cable, cable guide, random spare parts and special tools.
According to the requirements of users, it can also be responsible for the transportation, installation, commissioning, etc. of the equipment, and implement the turnkey project.
Except for the special requirements indicated by the user, the ground cable bridge, foundation, track and below track facilities of the upper cable are not provided.
4.2 ordering instructions
Please order according to the technical agreement or provide the following data and parameters.
4.2.1. Equipment production capacity requirements and functional requirements.
4.2.2. Turning radius and pitch form.
4.2.3. Tail car form (according to function and structure form).
4.2.4. Installation form.
4.2.5. Material stacking angle and height.
4.2.6 equipment configuration, power supply mode and requirements.
4.2.7. Relevant parameters of system belt conveyor (bandwidth, belt speed, height from rail surface, etc.).
4.2.8. Environmental conditions