全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
+
  • 3ae860ce-feea-4291-a44b-57d6d108eb9a.jpg

Waste resin catcher

key word:Heat exchange element


Product description

Waste resin catcher

 

1. Introduction

Application 1.1

Waste resin trapper is used to collect small resin discharged normally from water cap of condensate regeneration system equipment, and timely capture normal resin to avoid resin loss when water cap of regeneration equipment is damaged.

1.2 model significance

                     GF180

                     G --- filtration

                     F -- waste resin

                    180 -- equipment diameter (cm)

1.3 structural features

1.3.1. The inside is stainless steel wire wound filter element.

1.3.2. Anticorrosion of equipment lining glue.

1.4 main technical parameters

The main technical parameters of waste resin trapper are shown in table 70-1

Table 70-1 main technical parameters of waste resin trapper

Nominal diameter

Item
DN1200 DN1800
Design pressure (Mpa)  <0.1 <0.1
Design weight (kg) 400 820
Running load  ( N) 1000 1500
Typical application 300MW, 600MW 600MW, 1000MW

 

2. Equipment appearance and structural dimensions

The shape and structure of waste resin trapper are shown in figure 70-1, table 70-2 and table 70-3

Table 70-2 outline dimensions of waste resin trapper

Nominal diameter

Item
DN12000 DN1800
H 1945 1360
H1 1400 500
L 569 1100

 

Table 70-3 nozzle of waste resin trapper

Nozzle Code Usage Nominal dimensions
DN1200 DN1800
N1 air exhaust 150 150
N2 water outlet NPT3/4 NPT3/4
N3 water inlet 125 200
N4 water outlet 125 200
N5 air inlet 50 65