全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
+
  • 氢气冷却器.jpg

H2 cooler

key word:Heat exchange element


Product description

Winding tube: the base tube is copper tube and white copper tube, and the radiator is copper strip. It is wound by special equipment, and can be wound into I-type and L-type according to the needs, forming into spiral fin of Φ 28.6 - Φ 38. After winding, surface treatment is carried out by Hitachi manufacturing process, so that the heat sink and base tube are combined more fully. Its heat conduction performance is good, and the heat exchange efficiency is higher than that of wound spring type. Because the structure is easy to clean and has long service life, it is well received by users.

Whole set piece: the base tube is made of copper tube and white copper tube, and the heat sink is made of copper or aluminum. The heat sink is made of corrugated structure by special equipment. The base tube and the heat sink adopt integral expansion. After expansion, a wavy ventilation gap of 2.5mm is formed between the heat sink, so that the air flow can fully get heat exchange. The hydrogen cooler has the advantages of large heat exchange capacity, good rigidity, small volume, strong oxidation resistance and convenient cleaning. It is also widely used in large turbogenerators.