全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Cambodia Quartz sand floating bed ion exchanger

Product Description

Quartz sand floating bed ion exchanger

 

1. Introduction

1.1. Purpose

The equipment is a pure water treatment equipment. When the salt content of raw water is less than 500 mg / L, the salt content can be reduced to less than 10 mg / L after passing through the positive floating bed and the negative floating bed; when the salt content of the raw water is more than 500 mg / L, the weak type and strong type resin can be used in series; when the salt content of raw water is higher, it can also be combined with other pre desalination methods such as reverse osmosis. If the effluent quality is higher, secondary desalination equipment can be set.

1.2. Model meaning

                   JFL100•200A

                   J -- Ion Exchange

                   FL --- floating bed, lining

                  100 -------- equipment diameter (mm)

                  200 -------- resin layer height (mm)

                  A -------- quartz sand mold

1.3. Structural features

The influent water is in the form of dome shaped porous plate and quartz sand.

1.3.2. The outlet water is in the form of porous plate.

1.3.3. The equipment is equipped with local sampling device and water inlet and outlet pressure gauges.

1.3.4 the pressure of all interface flanges of the equipment is PN1.0MPa.

1.3.5. The equipment can be equipped with manual rubber lined diaphragm valve or pneumatic rubber lined diaphragm valve.

1.3.6. The valve at resin loading and unloading port is DC rubber lined diaphragm valve or ball valve.

1.3.7. When the diameter DN ≤ 1250, the large flange structure is adopted at the porous plate.

1.3.8. The equipment is lined with 1751 semi-rigid adhesive for anti-corrosion.

1.4. Product series

See table 18-1 for the product series of quartz sand floating bed ion exchanger

Table 18-1 quartz sand floating bed ion exchanger product series.

Nominal diameter

resin layer height

item
DN1000 DN1250 DN1600 DN1800
2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200
JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL
100·200A 100·250A 100·280A 100·320A 125·200A 125·250A 125·280A 125·320A 160·200A 160·250A 160·280A 160·320A 180·200A 180·250A 180·280A 180·320A
design capacity (t/h) 35 50 80 100
Resin volume  (m3) 1.57 1.96 2.2 2.51 2.45 3.07 3.44 3.93 4.02 5.03 5.63 6.43 5.1 6.36 7.12 8.14
compressed resin volume (m3) 0.157 0.245 0.4 0.51
Design mass (kg) 1655 1725 1765 1825 2460 2540 2610 2695 3090 3209 3280 3698 4050 4229 4336 4889
Operating load (N) 61000 66000 70000 74000 95000 103000 108000 114000 141000 154000 162000 173000 193000 203000 223000 243000
 
Nominal diameter

resin layer height

item
DN2000 DN2200 DN2500 DN2800
2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200
JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL JNL
200·200A 200·250A 200·280A 200·320A 220·200A 220·250A 220·280A 220·320A 250·200A 250·250A 250·280A 250·320A 280·200A 280·250A 280·280A 280·320A
design capacity (t/h) 125 150 195 245
Resin volume  (m3) 6.28 7.85 8.79 10.05 7.6 9.5 10.64 12.16 9.8 12.25 13.72 15.7 12.31 15.39 17.24 19.7
compressed resin volume (m3) 0.63 0.76 0.98 1.23
Design mass (kg) 4510 4695 4814 4973 5840 6113 6277 6495 6865 7175 7361 7609 8320 9165 9500 9830
Operating load (N) 193000 271000 289400 313500 263000 286000 304000 321000 392000 432000 443000 449000 325000 447000 478000 482000

 

2. Technical parameters

2.1. Main technical parameters

The main technical parameters of ion exchange in quartz sand floating bed are shown in table 18-2

Table 18-2 main technical parameters of quartz sand floating bed ion exchanger

Item Data Item Data
Design pressure(MPa) 0.6 container form Vertical
Design temperature(℃) 50 Welded joint coefficient 0.85
design flow rate(m/h) 40 material of the main body Q235-B
Design capacity(t/h) see table 18-1 Resin layer height(mm) see table 18-1

2.2. Special parameters

The turbidity of influent water should be less than 2mg / L

 

3. Equipment appearance and structural dimensions

The external and structural dimensions of quartz sand floating bed ion exchanger are shown in Fig. 18-1, table 18-3 and table 18-4

Table 18-3

Nominal diameter

Resin layer height

Item
DN1000 DN1250 DN1600 DN1800 DN2000 DN2200 DN2500 DN2800
2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200 2000 2500 2800 3200
H 4717 5217 5517 5917 4901 5401 5701 6101 5284 5784 6084 6484 5170 5670 5970 6370 5220 5720 6020 6420 5307 5807 6107 6507 5484 5984 6284 6684 5661 6161 6461 6861
H1 4217 4717 5017 5417 4401 4901 5201 5601 4784 5284 5584 5984 4670 5170 5470 5870 4720 5220 5520 5920 4807 5307 5607 6007 4984 5484 5784 6184 5161 5661 5961 6361
H2 3500 4000 4300 4700 3600 4100 4400 4800 3600 4100 4400 4800 3700 4200 4500 4900 3740 4200 4500 4900 3700 4200 4500 4900 3800 4300 4600 5000 3900 4400 4700 5100
H3 1200 1300 1300 1400 1400 1400 1500 1600
H4 300 400 400 400 400 400 500 500
H5 445 560 580 595 595 640 730 730
H6 1000 1000 1000 1200 1200 1200 1300 1300
H7 1450 1450 1450 1750 1750 1750 1850 1850
N×M 100×140 180×220 180×220 180×220 180×220 180×220 300×350 300×350
L1 754 896 1091 1208 1308 1445 1595 1747
L2 145 160 180 195 195 230 230 230
L3 248 313 333 398 398 433 433 433
L4 180 200 210 230 230 280 280 280
LA~LD See table 18-4
∮ 985 1000 1450 1600 1800 1900 2000 2150
DN1 80 80 100 100 100 100 100 100
DN2 32 40 50 50 50 80 80 80
DN3 50 80 100 125 125 150 150 150
DN4 80 100 125 150 150 200 200 200
DN5 32 50 80 80 100 125 125 125
DN6 32 40 40 40 40 40 50 50
quartz sand cushion Particle size 1~2 200 200 200 200
Particle size 2~4 100 150 150 150
Particle size 4~8 100 100 100 100
Particle size 8~16 100 150 150 150
Particle size 16~32 250 250 250 300

Table 18-4 LA ~ LD dimensions of quartz sand floating bed ion exchanger

Main parameter
Manual or Pneumatic type
Sanders pneumatic
Nominal diameter
LA LB LC LD
DN1000 160 160 210 300
150 150 194 258
DN1250 180 210 300 350
163 194 258 309
DN1600 210 300 350 400
194 258 309 362
DN1800 210 300 400 460
194 258 362 412
DN2000 210 350 400 460
194 309 362 412
DN2200 300 400 460 570
258 362 412 529
DN2500 300 400 460 570
258 362 412 529
DN2800 300 400 460 570
258 362 412 529

Note: for manual rubber lined diaphragm valve, LC and LD values are zero.

 

4. Ordering instructions

The regeneration liquid of the equipment is hydrochloric acid, sulfuric acid and sodium hydroxide.