PRODUCTS CENTER
Product Description
HG type annular coal feeder
1. Introduction
1.1. Purpose
The annular coal feeder is a large coal feeding equipment used in the lower part of cylindrical coal storage bunker in thermal power plant. It is composed of coal plough, coal feeder, driving positioning device, coal unloading plough and electric control system. When working, the car body moves along the circular track. The coal plough car evenly drops the coal in the circumferential gap at the lower part of the silo onto the coal feeder, and then the coal is transferred to the belt conveyor by the coal unloading plough. The product can be used in various industries to realize the quantitative feeding of bulk materials from silos.
1.2. Model meaning
HG-**/##
HG -- annular coal feeder
** -------- applicable silo diameter (m)
##---------Rated production capacity (T / h)
1.3. Product features
1.3.1. Adopt ring type gap coal extraction, increase the section of material outlet, and improve the coal blocking machine image of silo.
1.3.2. Frequency conversion control system is adopted to realize stepless speed regulation, which can continuously and evenly adjust coal feeding quantity.
1.3.3. The outside of car body is equipped with pin gear, which is reliable in operation, convenient in maintenance and low in cost.
1.3.4. The annular coal feeder is mainly composed of coal plough and coal feeder. The coal feeder is shown in Fig. 40-1 and the plough is shown in Fig. 40-2


2. Main technical parameters
The main technical parameters of HG type annular coal feeder are shown in table 40-1
Table 40-1 main technical parameters of HG type annular coal feeder
| Model | capacity | material volume | motor power | transmission type | track diameter | Track No. | Rotary speed | |
| (t/h) | (m3) | (mm) | (mm) | (kg/m) | (r/min) | |||
| HG22/500 | coal plough | 100~500 | 0.85 | 2×22 | pin gear transmission | ∮15000 | 24 | 0.1~0.31 |
| coal unloader | 2×22 | ∮13800 | 1.3 | |||||
| HG22/1000 | coal plough | 200~1000 | 2×22 | ∮15000 | 0~0.37 | |||
| coal unloader | 2×22 | ∮13800 | 1.69 | |||||
| HG22/1500 | coal plough | 300~1500 | 2×22 | ∮15000 | 0~0.43 | |||
| coal unloader | 2×22 | ∮13800 | 2.37 | |||||
| HG16/500 | coal plough | 200~800 | 2×22 | ∮9000 | 0.27~0.8 | |||
| coal unloader | 2×18.5 | ∮10000 | 1.5 | |||||
3. Equipment appearance and structural dimensions
HG16 / 500Y ring coal feeder is shown in figure 40-3, and HG22 / 1500y ring coal feeder is shown in figure 40-4.
