全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

Malta Separator of the ZGM mill

Product Description

The separator is a combination of dynamic and static separator, which mainly includes separator shell, static louver, rotor, coal drop pipe, driving part, powder return cone, sealing air pipe and other parts. The gas powder mixture sent from grinding area enters the separator and first passes through the static louver to produce a certain tangential velocity. Large particles directly return to the powder return cone due to their large mass In the grinding area, the rest of the pulverized coal flow is driven by the traction force and enters the rotor part. By adjusting the rotor speed, the centrifugal force of qualified pulverized coal particles and the traction force of the air flow are balanced, while the unqualified particles return to the grinding area for regrinding under the action of centrifugal force. The rotating speed of the rotary separator is designed to ensure that the fineness of pulverized coal in r90 is 3% ~ 35% adjustable at 500 ~ 1500rpm; the driving part is composed of two parts The motor is driven by the frequency converter, and the central hollow shaft is driven by the gear and the rotary support, so as to drive the rotor to rotate.

 

Key points of separator design

 

1. the separator has static separator and dynamic static combined rotary separator.

2. the structural dimension calculation shall be carried out in the design of static separator to determine the structure dimension of separator. In order to ensure the separation and distribution effect, the outlet pipe of distributor should be designed to coincide with the inner wall.

3. the number and length dimension of separator blades shall be paid attention to in design, and the limit position and angle of full opening and closing shall be reached. The new drawing blade of deba has added deflector, which is very effective according to publicity, and can be adopted in the new design.

4. the structural dimension calculation shall be carried out in the design of dynamic and static combined rotary separator to determine the structure dimension of separator, especially the relationship between the outlet air volume of coal mill and the dimension of each section.

5. the upper cover, shell and rotating shaft frame of separator drive device are also important parts. The matching size and processing accuracy of each component shall be ensured during design.

6. in order to ensure the good engagement between the pinion and the outer gear ball bearing, the tolerance dimension shall be given for the dimension from the center of the separator reducer to the center of the separator in the drive part.

7. the rotating blade and its assembly must be static balance test requirements, and reach G16 level according to jb/zz4-86 "balance of rigid body rotating parts", and make relative position mark.

8. the rotating blade shall be made of wear-resistant steel plate.

9. pay attention to the clearance between rotating parts and fixing parts.