PRODUCTS CENTER
Tanzania Resin ejector
Category:
Product Description
Resin ejector
1. Introduction
The ejector is based on the high pressure fluid (generally water) through the nozzle to form a high-speed flow of negative pressure to absorb and transport resin.
2. Technical parameters
The main technical parameters of resin ejector are shown in table 41-1
Table 41-1 main technical parameters of resin ejector
| Item | Data | Item | Data |
| Inlet water pressure(MPa) | >0.30 | Medium concentration (%) | <50 |
| inlet water temperature(℃) | 50 | equipment material | 1Cr18Ni9Ti |
| Medium | water, resin | Weight (kg) | 35.74 |
3. Equipment appearance and structural dimensions
See figure 41-1 for the configuration of resin ejector
