PRODUCTS CENTER
Tanzania PZF series Fluoroplastic ejector
Category:
Product Description
PZF series Fluoroplastic ejector
1. Introduction
1.1 purpose
The ejector is a kind of equipment that sucks and ejects another kind of low-pressure fluid by the negative pressure produced by the high-pressure fluid (generally water) formed by the nozzle, and has the mixing function. In water treatment, fluoroplastic injector is used to dilute and transport concentrated sulfuric acid regeneration solution.
1.2 model significance
PZF3.9
P ------ injection
Z -------- regeneration
F -------- fluoroplastics
3.9 -------- injection volume (T / h)
1.3 product series
The main product series of fluoroplastic ejector are shown in table 40-1
Table 40-1 main product series of fluoroplastic ejector
| Diameter of matching ion exchanger(mm) | 1000 | 1500 | 2000 | 2500 | 3000 | ||
| Injection volume(t/h) | 7.9 | 17.7 | 31.5 | 49.3 | 70.9 | 105 | |
| Structure dimensions | A (mm) | 170 | 170 | 170 | 170 | 170 | 200 |
| B (mm) | 125 | 120 | 125 | 150 | 170 | 240 | |
| C (mm) | 255 | 290 | 310 | 400 | 450 | 685 | |
| Flange joint | DN1 (mm) | 50 | 50 | 50 | 50 | 50 | 50 |
| DN2 (mm) | 100 | 125 | 125 | 125 | 125 | 150 | |
| DN3 mm) | 100 | 125 | 125 | 125 | 125 | 150 | |
| Weight(kg) | 18.5 | 23.7 | 24.38 | 35.3 | 34.78 | 59.5 | |
2. Technical parameters
The main technical parameters of fluoroplastic ejector are shown in table 40-2
Table 40-2 main technical parameters of fluoroplastic ejector
| Item | Data | Item | Data |
| Inlet water pressure(MPa) | >0.30 | Suction chamber vacuum (MPa) | 0.04 |
| inlet water temperature(℃) | 20-30 | inlet chemical concentration (%) | 98 |
| Outlet water pressure (MPa) | 0.18 | outlet chemical concentration (%) | 4 |
3. Equipment appearance and structural dimensions
The outline structure of fluoroplastic ejector is shown in Fig. 40-1 and table 40-1
