GYT Active Carbon Filter
key word:Heat exchange element
Category:
Product description
GYT Active carbon filter
1. Introduction
1.1. Purpose
Activated carbon filter is mainly used to remove residual fluorine, color, organic matter and colloidal silicon in water. As a pretreatment system equipment of ion exchanger, it can prevent resin poisoning pollution and ensure the service life of resin.
1.2. Model meaning
G Y T 250•200
G ------ filtration
Y -------- pressure type
T-----------Activated carbon
250 -------- equipment diameter (CM)
200---------Height of filling layer (CM)
1.3. Structural features
1.3.1. The upper water inlet device is in the form of mother pipe and branch pipe.
1.3.2. The lower water outlet device is in the form of multi orifice plate water cap.
1.3.3. The equipment is lined with 1751 semi hard rubber.
1.3.4. The equipment is equipped with local sampling device and inlet and outlet pressure gauges.
1.3.5. The pressure rating of all interface flanges is PNI. 0mpa
1.3.6. Valve type.
1.4. Product series
The product series of activated carbon filter is shown in table 6-1
Table 6-1 active carbon filter product series
| Nominal diameter Model Itme |
DN2500 | DN3000 | DN3200 | |||||
| GYT250·200 | GYT250·250 | GYT300·200 | GYT300·250 | GYT320·200 | GYT320·250 | |||
| filter layers height(mm) | 2000 | 2500 | 2000 | 2500 | 2000 | 2500 | ||
| Design capacity(t/h) | 49 | 70 | 80 | |||||
| Equipment weight(kg) | 6278 | 6792 | 8496 | 9224 | 9551 | 10327 | ||
| Running loading(N) | 269280 | 306080 | 394510 | 447500 | 452980 | 513270 | ||
Note: the unit of nominal diameter is mm.
2. Technical parameters
The main technical parameters of activated carbon filter are shown in table 6-2
Table 6-2 main technical parameters of activated carbon filter
| Item | Data | Item | Data |
| Design pressure(MPa) | 0.6 | Welded joint coefficient | 0.85 |
| Design temperature(℃) | 50 | material of the main body | Q235-B |
| Design flow rate(m/h) | 10 | container form | vertical |
| Design height(mm) | See table 6-1 | design capacity (t/h) | See table 6-1 |
3. Equipment shape and structure size
See Figure 6-1, table 6-3 and table 6-4 for the overall dimensions of activated carbon filter equipment

Table 6-3 dimensions of activated carbon filter
| Nominal diameter Layer height Item |
DN2500 | DN3000 | DN3200 | |||
| 2000 | 2500 | 2000 | 2500 | 2000 | 2500 | |
| H | 5521 | 6271 | 5677 | 6427 | 5877 | 6627 |
| H1 | 317 | 302 | 302 | |||
| H2 | 680 | 695 | 695 | |||
| H3 | 1300 | 1300 | 1300 | |||
| ¢ | 2000 | 2272 | 2400 | |||
| L | 1545 | 1812 | 1912 | |||
| L1 | 180 | 195 | 195 | |||
| L2 | 600 | 700 | 700 | |||
| L3 | 1182 | 1419 | 1519 | |||
| LA~LC | 见表6-4 | |||||
| N×M | 300×350 | 300×350 | 300×350 | |||
| DN1 | 125 | 150 | 460 | |||
| DN2 | 100 | 100 | 350 | |||
| DN3 | 40 | 40 | 180 | |||
Table 6-4 dimensions of activated carbon filter LA ~ LC
| Nominal diameter Item |
DN2500 | DN3000 | DN3200 |
| LA(G41J-6) | 400 | 460 | 460 |
| LB(G41J-6) | 350 | 350 | 350 |
| LC(G41J-6) | 180 | 180 | 180 |
Related products
Online Message