PZY Series Plexiglass ejector
key word：Heat exchange element
Category:
Product description
PZY Series Plexiglass ejector
1. Introduction
1.1 purpose
The ejector is a kind of equipment that sucks and ejects another kind of low-pressure fluid by the negative pressure produced by the high-pressure fluid (generally water) formed by the nozzle, and has the mixing function. In water treatment, the plexiglass injector is used to dilute and transport hydrochloric acid regeneration solution.
1.2 model significance
PZY3.9
P -------- eject
Z ------- regeneration
Y -------- plexiglass
3.9 -------- ejecting volume (T / h)
1.3 product series
See table 38-1 for main product series of plexiglass ejector
Table 38-1 main product series of plexiglass ejector
| Diameter of matching ion exchanger（mm） | 1000 | 1500 | 2000 | 2500 | 3000 | |
| Injection volume（t/h） | 3.9 | 8.9 | 15.7 | 24.6 | 35.4 | |
| Structure dimensions | A (mm) | 120 | 120 | 120 | 180 | 180 |
| B (mm) | 82 | 165.5 | 166.8 | 207.8 | 216.1 | |
| C (mm) | 229.4 | 414 | 427.2 | 528.7 | 648.6 | |
| Flange joint | DN1 (mm) | 32 | 32 | 40 | 40 | 65 |
| DN2 (mm) | 50 | 100 | 100 | 125 | 150 | |
| DN3 mm) | 50 | 100 | 100 | 125 | 150 | |
| Weight（kg） | 2.3 | 7.24 | 7.5 | 11.87 | 13.8 | |
2. Technical parameters
Main technical parameters of plexiglass ejector are shown in table 38-2
Table 38-2 main technical parameters of plexiglass ejector
| Item | Data | Item | Data |
| Inlet water pressure（MPa） | >0.31 | Suction chamber vacuum （MPa） | 0.025 |
| inlet water temperature（℃） | 20-30 | inlet chemical concentration (%) | 31 |
| Outlet water pressure （MPa） | 0.15 | outlet chemical concentration (%) | 5 |
3. Equipment appearance and structural dimensions
The shape and structure of plexiglass ejector are shown in figure 38-1 and table 38-1
Related products
Online Message