DN1700 precision filter
key word：Heat exchange element
Category:
Product description
DN 1700 precision filter
1. Introduction
1.1 purpose
Polypropylene fiber filter element is installed in the precision filter. According to the pore size of different filter elements, the impurities of solid particles with different particle sizes in water can be removed. The equipment is mainly used in the condensate polishing system of power plant because of its large capacity.
1.2 model significance
GYX 170
G -- filtration
Y -------- pressure type
X -------- winding
170 -------- nominal diameter of equipment (mm)
1.3 structural features
1.3.1. The inlet pipe is equipped with baffle device
1.3.2. All several filter elements are fixed on the upper and lower porous plates inside the equipment.
1.3.3. The equipment is lined with 1751 semi hard rubber for anti-corrosion.
1.3.4. The pressure rating of all interface flanges is PN2.0MPa.
2. Technical parameters
See table 44-1 for main technical parameters of DN 1700 precision filter
Table 44-1 main technical parameters of DN 1700 precision filter
| Item | Data | Item | Data |
| Design pressure（MPa） | 1.28 | Welded joint coefficient | 0.85 |
| Design temperature（℃） | 60 | material of the main body | Q235-B |
| design flow rate（m/h） | 305 | 1Cr18Ni9Ti | |
| Design capacity（t/h） | 700 | container form | Vertical |
| Design net weight（mm） | 4741 | Running load | 26700 |
3. Equipment appearance and structural dimensions
See figure 44-1 for the outline structure of DN 1700 precision filter
Related products
Online Message