Cation resin regeneration and storage tower
key word：Heat exchange element
Category:
Product description
Cation resin regeneration and storage tower
1. Introduction
1.1 purpose
The cation regeneration and resin storage tower is used for condensate polishing in vitro regeneration system. The cation resin separated from the resin separation tower is transported to the equipment for cleaning and regeneration; at the same time, the regenerated anion resin can be received from the anion regeneration tower; the regenerated anion resin and cation resin are evenly mixed in the equipment and stored for standby, so as to be transported to the mixed bed for operation at any time.
1.2 model significance
JZYA•180
J -- Ion Exchange
Z -- Regeneration
YA -- cation resin
180 -------- equipment diameter (mm)
1.3 structural features
1.3.1. The water inlet device is arc-shaped water baffle.
2.2.1. The main pipe is trapezoidal.
1.3.3. The water outlet device is a porous plate with a double speed water cap.
1.3.4. The equipment is lined with 1751 semi-rigid rubber.
1.4 product series
The main product series of cation regeneration and resin storage tower are shown in table 50-1
Table 50-1 main product series of cation regeneration and resin storage tower
| Nominal meter | DN1500 | DN1800 | DN2000 |
| Model | JZYA150 | JZYA180 | JZYA200 |
| Resin volume（m3） | 1.9 | 4.6 | 3.6 |
| Design weight（kg） | 2200 | 3950 | 4400 |
| Running load（N） | 128000 | 30000 | 32000 |
| Typical application（MW） | 300 | 600, 1000 | 1000, CPR1000 |
2. Technical parameters
The main technical parameters of cation regeneration and resin storage tower are shown in table 50-2
Table 50-2 main technical parameters of cation regeneration and resin storage tower
| Item | Data | Item | Data |
| Design pressure（MPa） | 0.6 | Backwash expansion rate | 100% |
| Design temperature（℃） | 50 | Welded joint coefficient | 0.85 |
| material of the main body | Q235-B | container form | Vertical |
3. Equipment appearance and structural dimensions
The external structure of cation regeneration and resin storage tower is shown in Fig. 50-1, table 50-3 and table 50-4
Table 50-3 main dimensions of cation regeneration and resin storage tower
| Nominal diameter Item |
DN1500 | DN1800 | DN2000 |
| H | 4845 | 6650 | 7700 |
| H1 | 1085 | 1340 | 1295 |
| H2 | 3200 | 4720 | 5764 |
| H3 | 2268 | 3470 | 3744 |
| H4 | 1078 | 1877 | 1576 |
| H5 | 590 | 743 | 640 |
| L | 910 | 1050 | 1150 |
| L1 | 305 | 366 | 366 |
| ∮ | 980 | 1150 | 1310 |
Table 50-4 nozzle table
| Nozzle Code | Usage | Nominal dimensions | ||
| DN1500 | DN1800 | DN2000 | ||
| N1 | Exhause port | 40 | 50 | 50 |
| N2 | water inlet | 80 | 80 | 80 |
| N3 | Resin outlet | 80 | 80 | 80 |
| N4 | water outlet | 80 | 80 | 80 |
| N5 | Resign inlet | 80 | 80 | 80 |
| N6 | Regeneration fluid inlet | 50 | 80 | 65 |
| N7～N10 | Mirror | 140×40 | 140×40 | 140×40 |
| N11 | Top hole | 450 | 450 | 450 |
| N12 | side hole | 500 | 500 | 500 |
Related products
Online Message