DN1200 anion resin regeneration tank
key word：Heat exchange element
Category:
Product description
DN 1200 anion resin regeneration tank
1. Introduction
1.1 purpose
Anion resin regeneration tank is used for condensate treatment in vitro regeneration system. It is used to regenerate and clean the anion resin which fails in high-speed mixed ion exchanger.
1.2 model significance
JZY120-2.28
J -- ion exchanger
Z -- Regeneration
Y -------- anion resin
120 -- nominal diameter of equipment (mm)
2.28 --- resin volume (M3)
1.3 structural features
1.3.1. The alkali inlet device is in the form of main pipe and branch pipe, and the branch pipe is in the form of filter element.
1.3.2. The drainage device at the lower part of the equipment is in the form of dished multi orifice plate water cap.
1.3.3. The equipment is lined with 1751 semi hard rubber
1.3.4. The pressure rating of external flange of equipment is PN1.0MPa.
2. Technical parameters
See table 51-1 for the main technical parameters of the anion resin regeneration tank of DN1200.
Table 51-1 main technical parameters of DN1200 anion resin regeneration tank
| Item | Data | Item | Data |
| Design pressure（MPa） | 0.6 | container form | Vertical |
| Design temperature（℃） | 50 | Welded joint coefficient | 0.7 |
| Resin volume （m3） | 2.28 | material of the main body | Q235-B |
| Equipment net weight (kg) | 2040 | Running load (N) | 9000 |
3. Equipment appearance and structural dimensions
See figure 51-1 for the anion resin regeneration tank of DN1200
Related products
Online Message