全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
+
  • 3ae860ce-feea-4291-a44b-57d6d108eb9a.jpg

DN2000 Thermal electric water tank

key word:Heat exchange element


Product description

DN2000 thermal electric water tank

 

1. Introduction

1.1. Purpose

The electric water tank is a kind of equipment that uses electric heating elements to heat the desalted water. The maximum heating temperature is 82 ℃. The heated water can be controlled at about 42 ℃ through the three-way regulating valve and cold water mixing. The hot water is used to ensure the temperature of alkali liquor regenerated by anion exchange, so as to improve the regeneration degree of anion resin.

1.2. Model meaning

                      RMD200•9

                      R -- heat exchange

                      M ------ surface type

                      D -------- electric heating

                      200 -- nominal diameter of equipment (mm)

                       9 -------- resin volume (M3)

1.3. Structural features

1.3.1. The temperature measuring point and temperature controller interface are m27x2 internal thread.

1.3.2. The connection of pressure gauge is m20x1.5 internal thread.

1.3.3. The interface flange of electric heater is non-standard flange.

1.3.4. Equipment body materials are divided into 304SS and carbon steel inner wall painting.

1.3.5. The pressure rating of external flange of equipment is PN1.0MPa.

 

2. Technical parameters

The main technical parameters of DN2000 thermal electric water tank are shown in table 58-1.

Table 58-1 main technical parameters of DN2000 thermal electric water tank

Item Data Item Data
Design pressureMPa 0.6 container form Vertical
Design temperature(℃) 85 Welded joint coefficient 0.85
Effective volume (m3) 9 material of the main body 304SS
Total electric heating capacity (kw) 120 Voltage V 380

 

3. Equipment appearance and structural dimensions

The external structure of DN2000 thermal electric water tank is shown in figure 58-1

 

4. Ordering instructions

4.1. The interface flange of floating ball liquid level controller is non-standard flange, which can be made according to user requirements.

4.2. The material of equipment body is 304SS and the inner wall of carbon steel is painted. Please specify when ordering.