Y type filter
key word：Heat exchange element
Category:
Product description
Y-type filter
1. Introduction
1.1. Purpose
The equipment is installed at the inlet of the metering pump to cut off the pollution and ensure the safe operation of the pump.
1.2. Model meaning
G J W 20
G ------ filtration
J -------- interception
W -------- pollution retention
20 -------- nominal diameter of water inlet and outlet (CM)
1.3. Structural features
1.3.1. DN ≥ 40, lined with 1751 semi hard rubber.
1.3.2. When DN ≤ 25, the product material can be 1Cr18Ni9Ti
1.4. Product series
See table 11-1 for Y-type filter product series
Table 11-1 product series of Y-type filter
| Nominal diameter Model Itme |
DN20 | DN25 | DN10 | DN50 |
| Y20 | Y25 | Y40 | Y50 | |
| L1(mm) | 150 | 160 | 291 | 300 |
| L2(mm) | 90 | 100 | 125 | 130 |
| equipment weight（kg） | 3.05 | 3.8 | 21 | 23 |
2. Technical parameters
2.1. Design pressure: 0.6MPa
2.2. Design temperature: 50 ℃
2.3. Main material: HT200
3. Equipment appearance and structural dimensions
The external structure of Y-type filter is shown in Fig. 11-1.
