Double chamber floating bed ion exchanger
key word：Heat exchange element
Category:
Product description
Double chambers floating bed ion exchanger
1. Introduction
1.1. Purpose
When the salt content of raw water is less than 500m mg / L, the salt content can be reduced to less than 10mg / L after passing through the common cation floating bed and anion floating bed; the salt content of raw water is more than 500m When the salt content of raw water is higher, it can be combined with other pre desalination methods such as reverse osmosis. If the effluent quality is higher, secondary desalination equipment can be set.
1.2. Model meaning
JFSS160 • 100/150
J -------- ion exchange
F -------- floating bed, lining
SS -------- double chambers
160 -------- equipment diameter (mum)
100 / 150 --- resin layer height (mm)
1.3. Structural features
1.3.1. The inlet and outlet devices are in the form of porous plate and water cap.
1.3.2. The equipment is equipped with local sampling device and inlet and outlet pressure gauges.
1.3.3 the pressure rating of all interface flanges of the equipment is PNI. 0mpa
1.3.4. The equipment is equipped with manual rubber lined diaphragm valve or pneumatic rubber lined diaphragm valve.
1.3.5. The equipment regeneration liquid is hydrochloric acid, sulfuric acid and sodium hydroxide.
1.3.6. The valve at resin loading and unloading port is DC rubber lined diaphragm valve or ball valve.
1.3.7. The packing layer height of the equipment is considered as 200 mm.
1.3.8. The equipment is lined with 1751 semi-rigid adhesive for anti-corrosion.
1.4. Product series
The product series of double chamber floating bed ion exchanger is shown in table 22-1
Table 22-1 main product series of double chamber floating bed ion exchanger
| Nominal diameter Resin height (strongly/weakly) Item |
DN1600 | DN2000 | DN2500 | DN2800 | DN3000 |
| 1500/1000 | 1500/1000 | 1500/1000 | 1500/1000 | 1500/1000 | |
| Model | JNSS160 | JNSS200 | JNSS250 | JNSS280 | JNSS300 |
| 150/100 | 150/100 | 150/100 | 150/100 | 150/100 | |
| Volume of filling layers（m3） | 0.4×2 | 0.63×2 | 0.98×2 | 1.23×2 | 1.41×2 |
| Resin volume （m3） | 2.01/3.01 | 3.14/4.71 | 4.91/7.36 | 6.15/9.23 | 7.07/10.60 |
| Capacity（t/h） | 80 | 125 | 195 | 245 | 282 |
| Equipment weight（kg） | 4020 | 6110 | 9930 | 12190 | 13860 |
| Running loading（N） | 17300 | 30290 | 48420 | 51270 | 56680 |
2. Technical parameters
The main technical parameters of double chamber floating bed ion exchanger are shown in table 22-2
Table 22-2 main technical parameters of double chamber floating bed ion exchanger
| Item | Data | Item | Data |
| Design pressure（MPa） | 0.6 | container form | Vertical |
| Design temperature（℃） | 50 | Welded joint coefficient | 0.85 |
| design flow rate（m/h） | 40 | material of the main body | Q235-B |
| Design capacity（t/h） | see table 22-1 | Resin layer height（mm） | see table 22-1 |
3. Equipment appearance and structural dimensions
The outline and structural dimensions of double chamber floating bed ion exchanger are shown in Fig. 22-1, table 22-3 and table 22-4
Table 22-3 Main dimensions of double chamber floating bed ion exchanger
| Nominal diameter Item |
DN1600 | DN2000 | DN2500 | DN2800 | DN3000 |
| H | 6503 | 6168 | 6565 | 6719 | 6825 |
| H1 | 6003 | 5668 | 6065 | 6219 | 6325 |
| H2 | 4870 | 4698 | 4931 | 5010 | 5062 |
| H3 | 3070 | 2898 | 3131 | 3210 | 3262 |
| H4 | 2850 | 2672 | 2901 | 2978 | 3030 |
| H5 | 1351 | 1172 | 1401 | 1478 | 1530 |
| H6 | 400 | 400 | 500 | 500 | 500 |
| H7 | 580 | 595 | 730 | 730 | 730 |
| H8 | 1000 | 1200 | 1300 | 1300 | 1300 |
| H9 | 1450 | 1750 | 1850 | 1850 | 1850z |
| ∮ | 1450 | 1800 | 2000 | 2150 | 2275 |
| L1 | 1091 | 1308 | 1595 | 1747 | 1847 |
| L2 | 180 | 195 | 230 | 230 | 230 |
| L3 | 333 | 398 | 433 | 433 | 433 |
| L4 | 210 | 230 | 280 | 280 | 280 |
| N×M | 180×220 | 180×220 | 300×350 | 300×350 | 300×350 |
| DN1 | 100 | 100 | 100 | 100 | 100 |
| DN2 | 50 | 50 | 80 | 80 | 80 |
| DN3 | 100 | 125 | 150 | 150 | 150 |
| DN4 | 125 | 150 | 200 | 200 | 200 |
| DN5 | 80 | 100 | 125 | 125 | 125 |
| DN6 | 40 | 40 | 50 | 50 | 50 |
| DN4 | 40 | 40 | 40 | 50 | 50 |
| DN5 | 32 | 32 | 32 | 50 | 50 |
| DN6 | 80 | 80 | |||
| DN7 | 40 | 40 | |||
| DN8 | 40 | 40 |
Table 22-4 LA～ LD dimensions of double chamber floating bed ion exchanger
| Main data Nominal diameter |
LA | LB | LC | LD |
| DN1600 | 210 | 300 | 350 | 400 |
| 194 | 258 | 309 | 362 | |
| DN2000 | 210 | 350 | 400 | 460 |
| 194 | 309 | 362 | 412 | |
| DN2500 | 300 | 400 | 460 | 570 |
| 258 | 362 | 412 | 529 | |
| DN2800 | 300 | 400 | 460 | 570 |
| 258 | 362 | 412 | 529 | |
| DN3000 | 300 | 400 | 460 | 570 |
| 258 | 362 | 412 | 529 |
4. Ordering instructions
4.1. The equipment regeneration liquid is hydrochloric acid or sulfuric acid. Sodium hydroxide. When sulfuric acid is used for regeneration, the order must be specified.
4.2. The height of exchanger layer depends on the water quality, and it must be indicated when ordering.
