全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
+
  • TF.jpg

TF type carbon remover

key word:Heat exchange element


Product description

TF type carbon remover

 

1. Introduction

1.1. Purpose

This equipment is used to remove free carbon dioxide in water by air blowing degassing method. The water is introduced from the upper part of the equipment, sprayed by the spray device, and flows through the filler with large surface area; the air is introduced from the air outlet at the lower part of the equipment, and reversely passes through the packing layer; the free carbon dioxide in the water rapidly precipitates and is discharged from the top. In the water treatment system, it is generally set behind the hydrogen ion exchanger. As long as it is used properly, the residual carbon dioxide of water after decarbonization is less than 5mg / L

1.2. Model meaning

                      TF 200•250

                      T -- degassing

                      F ------- air blow

                     200 --- equipment diameter (mm)

                     250 -------- packing layer height (mm)

1.3. Structural features

1.3.1. The water inlet device is in the form of main pipe and branch pipe.

1.3.2. There are PVC grid plates at the bottom of the middle filling section to support the fillers loaded inside the equipment.

1.3.3 when the nominal diameter water of the equipment is greater than 800, the flange structure shall be adopted, and the inlet hole on the lower side shall be cancelled.

1.3.4. The equipment is lined with 1751 semi-rigid adhesive.

1.3.5. The extension length of inlet pipe is as follows:

DN2≤250,100mm

DN2=300,120mm

DN2=35,140mm

1.4 product series

The product series of TF type carbon remover is shown in table 25-1

Table 25-1 product series of TF carbon remover

Nominal diameter 600 800 1000 1100 1250 1400 1600
Model TF60· TF80· TF100· TF110· TF125· TF140· TF160·
160400 160400 160400 160400 160400 160400 160400
Capacityt/h 17 30 47 57 74 92 120
Air consumptionm3/h 336504 600900 9361404 11281692 14642196 18362754 24003600
Matching fan model CQ18-J CQ24-J CQ19-J CQ19-J CQ19-J CQ20-J CQ20-J
filling layer heightmm filling volumem3
1600 0.45 0.8 1.25 1.5 1.95 2.45 3.2
2000 0.56 1 1.56 1.88 2.44 3.06 4
2500 0.7 1.25 1.95 2.35 3.05 3.83 5
3200 0.89 1.61 2.5 3.01 3.9 4.9 6.4
4000 1.12 2 3.12 3.76 4.88 6.12 8
 
Nominal diameter 1800 2000 2200 2500 2800 3000 3200
Model TF180· TF200· TF220· TF250· TF280· TF300· TF320·
160400 160400 160400 160400 160400 160400 160400
Capacityt/h 153 188 228 294 369 424 482
Air consumptionm3/h 336504 600900 9361404 11281692 14642196 18362754 24003600
Matching fan model CQ21-J CQ21-J 4-72-11 4-72-11 4-72-11 4-72-11 4-72-11
filling layer heightmm 4.5A 7.5KW 4.5A 7.5KW 4.5A 7.5KW 4.5A 7.5KW 4.5A 7.5KW
1600 filling volumem3
2000 4.05 4.99 6.05 7.82 9.81 12.7 12.82
2500 5.06 6.24 7.56 9.78 12.26 15.8 16.02
3200 6.33 7.8 9.45 12.23 15.33 19.8 20.03
4000 8.1 9.9 12.1 15.64 19.67 24.4 25.63
4000 10.1 12.48 15.12 19.56 24.52 31.7 32.04

 

2. Technical parameters

The main technical parameters of TF carbon remover are shown in table 25-2

Table 25-2 main operation parameters of TF carbon remover

Item Data Item Data
Design pressureMPa 0.6 Welded joint coefficient 0.85
Design temperature(℃) 50 material of the main body Q235-B
Spray densitym3/h·m2)】 60 filling layer height See table 25-1
Capacityt/h See table 25-1    

 

3. Equipment appearance and structural dimensions

The outline and structural dimensions of TF type carbon remover are shown in Fig. 25-1 and table 25-3

Table 25-3 dimensions of TF carbon remover

Item

Nominal diameter
Filling layer height H1 H2 H3 L 1 2 n-d DN1 DN2 DN3 a×d Weight
kg)
Load
N
DN600 1600 3150 2800 550 405 720 680 28-18 200 80 100 130×220 397 9000
2000 3550 3200 424 10500
2500 4050 3700 458 12400
3200 4750 4400 505 15100
4000 5550 5200 559 18100
DN800 1600 3180 2800 550 505 920 880 32-18 200 100 125 141×203 573 14600
2000 3580 3200 605 17200
2500 4080 3700 644 20350
3200 4780 4400 696 24750
4000 5580 5200 763 29850
DN1000 1600 3297 2906 600 605 1120 1080 36-18 300 100 150 156×264 899 22900
2000 3697 3306 948 26850
2500 4107 3806 1010 31800
3200 4897 4506 1091 38700
4000 5697 5306 1196 46650
DN1100 1600 3363 2956 600 605 1220 1180 36-18 300 125 150 156×264 915 25950
2000 3763 3356 970 30700
2500 4263 3856 1040 36650
3200 4963 4556 1138 45000
4000 5763 5356 1250 54500
DN1250 1600 3379 2956 600 731 1390 1345 28-23 350 125 200 156×264 1215 33850
2000 3779 3356 1284 39950
2500 4279 3856 1370 47600
3200 4979 4556 1490 57300
4000 5779 5356 1628 70500
DN1400 1600 3504 3006 600 806 1540 1495 32-23 350 150 200 206×273 1326 40500
2000 3904 3406 1382 54150
2500 4404 3906 1477 57300
3200 5104 4606 1611 70550
4000 5904 5406 1964 87650
DN1600 1600 3528 3006 600 906 1740 1695 36-23 400 150 200 206×273 1652 52050
2000 3928 3406 1731 61750
2500 4428 3906 1830 73850
3200 5128 4606 1959 90650
4000 5928 5406 2127 110100
DN1800 1600 3544 3006 600 1008 1940 1895 40-23 100 200 250 236×313 1975 64700
2000 3944 3406 2082 77020
2500 4444 3906 2215 92400
3200 5144 4606 2388 113800
4000 5944 5406 2611 138500
DN2000 1600 3576 3006 600 1108 2140 2095 44-23 500 200 300 236×313 2239 77900
2000 3976 3406 2357 92950
2500 4476 3906 2505 111800
3200 5176 4606 2698 138050
4000 5976 5406 2950 168300
DN2200 1600 3693 3106 650 1208 2370 2320 56-27 600 250 300 371×415 3057 97750
2000 4093 3506 3197 115500
2500 4593 4006 3412 138550
3200 5223 4706 3622 169900
4000 6093 5506 3907 206150
DN2500 1600 3741 3106 650 1208 2670 2620 60-27 600 250 350 371×415 3159 118350
2000 4141 3506 3307 141600
2500 4641 4006 3493 170550
3200 5341 4706 3743 210950
4000 6141 5506 4648 263500
DN2800 1600 4076 3356 700 1530 2970 2920 60-27 700 300 350 371×415 4658 131850
2000 4476 3756 4883 155400
2500 4976 4256 5166 221650
3200 5676 4956 5561 273200
4000 6476 5756 6012 332100
DN3000 1600 4106 3356 700 1650 3170 3120 64-27 700 350 400 426×456 5105 176000
2000 4506 3756 5353 209700
2500 5006 4256 5667 251850
3200 5706 4956 6104 311850
4000 6506 5756 6604 378300
DN3200 1600 4141 3356 700 1750 3410 3355 64-27 700 350 400 426×456 4485 18695
2000 4541 3716 4760 225350
2500 5041 4256 4900 271250
3200 5741 4956 5575 340000
4000 6541 5756 6115 416400

 

4. Ordering instructions

4.1. The filling material is ∮ 50 plastic polyhedral ball, which shall be taken care of by the user.

4.2. The supporting equipment includes water seal, water collector, fan, intermediate water tank, etc. if you need, please order separately.