HBY series Mixing tee
key word：Heat exchange element
Category:
Product description
HBY series Mixing tee
1. Introduction
1.1 purpose
The equipment is used for dilution and mixing of hydrochloric acid, caustic soda and other liquids.
1.2 model significance
HBY-50•40
H -- mixing
B ------ agitate
Y -------- pressure
50 --- equipment diameter (CM)
40 -------- inlet diameter (mm)
1.3 structural features
The equipment is made of carbon steel and lined with a layer of 3mm thick rubber plate.
1.4 product series
See table 33-1 for the product series of mixing tee
Table 33-1 main product series of mixing tee
| Specification（mm） | Model | Outline dimensions（mm） | Flange（mm） | Weight | ||||
| L | L1 | L2 | H | DN1 | DN2 | (kg) | ||
| DN50/DN40 | HBY50·40 | 279 | 70 | 100 | 103 | 50 | 40 | 8.5 |
| DN50/DN50 | HBY50·50 | 279 | 70 | 100 | 103 | 50 | 50 | 9 |
| DN80/DN40 | HBY80·40 | 378 | 70 | 155 | 133 | 80 | 40 | 11.5 |
| DN125/DN40 | HBY125·40 | 508 | 100 | 163 | 163 | 125 | 40 | 20 |
2. Technical parameters
The main technical parameters are as follows:
2.1. Design pressure: < 0.6MPa
2.2. Design temperature: 50 ℃.
3. Equipment appearance and structural dimensions
See Fig. 33-1 and table 33-1 for the shape and structural dimensions of the mixing tee
