DN1600 anion resin regeneration tank
key word：Heat exchange element
Category:
Product description
DN1600 anion resin regeneration tank
1. Introduction
1.1 purpose
Anion resin regeneration tank is used for condensate treatment in vitro regeneration system. It is an equipment for regeneration and cleaning of anion resin that fails in high-speed mixed ion exchanger, and has the function of storing mixed grease.
1.2 model significance
JZY160-3.86
J -- ion exchanger
Z -- Regeneration
Y -------- anion resin
160 -- nominal diameter of equipment (mm)
3.86 --- resin volume (M3)
1.3 structural features
1.3.1. The alkali inlet device is in the form of main pipe and branch pipe, and the branch pipe is in the form of filter element.
1.3.2. The drainage device at the lower part of the equipment is in the form of dished multi orifice plate water cap.
The equipment is lined with 1751 semi hard rubber.
1.3.4. The pressure rating of external flange of equipment is PN1.0MPa.
2. Technical parameters
See table 52-1 for the main technical parameters of the anion resin regeneration tank
Table 52-1 main technical parameters of DN1600 anion resin regeneration tank
| Item | Data | Item | Data |
| Design pressure（MPa） | 0.75 | container form | Vertical |
| Design temperature（℃） | 50 | Welded joint coefficient | 0.85 |
| Resin volume （m3） | 3.86 | material of the main body | Q235-B |
| Equipment net weight (kg) | 2552 | Running load (N) | 13000 |
3. Equipment appearance and structural dimensions
See figure 52-1 for the external structure of the anion resin regeneration tank of DN1600
