全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册
+
  • u=3607785449,3925190483&fm=15&gp=0.jpg

CZQ bin wall vibrator

The bin wall vibrator is a new type of blocking device which uses the vibration motor as the excitation source. The device is installed on all kinds of material silos. Through vibration, the lumped materials in the silo can be displaced and move, so as to play the role of deblocking.

key word:Heat exchange element


Product description

1. Brief

The bin wall vibrator is a new type of blocking device which uses the vibration motor as the excitation source. The device is installed on all kinds of material silos. Through vibration, the lumped materials in the silo can be displaced and move, so as to play the role of deblocking.

Vibration motor is a kind of ideal vibration source which combines transport power source and excitation source. Because the whole structure of vibration motor is closed, it can be used normally when installed on the dust operation equipment. Because the insulation treatment of motor coil is strict, the working environment humidity is within 80 ℃.

The effect of installing the wall vibrator on the bin and discharge pipe is very obvious, and the blocking phenomenon can be eliminated; However, due to the complexity of the materials stored in the silo and discharge pipe, it is difficult to master the application rules of the silo wall vibrator in the silo equipment. Only some selection parameters are provided here for users' reference.

 

2. Model Description:

CZQ-**

CZQ-----------Bin wall vibrator

**------------Equipped with vibration motor model

 

3. Instructions:

3.1. When installing more than two vibrating motors, the installation position shall be staggered by 50-100 mm.

3.2. The welding must be firm, and the fastening bolt must be spring washer and high strength bolt.

3.3. Before the vibration motor is installed, the scale of the eccentric block shall be adjusted to the appropriate position, and the Adjustment Scales of the two groups of eccentric blocks shall be consistent.

3.4. For the silo with general structure, 4-stage motor with small amplitude should be adopted.

 

4. Parameters

Selection table for standard capacity, thickness and bin wall vibrator

VolumeT 1 3 10 20 50 150 200
Plate depthmm 3.2-4.5 6 8 10 12 16 30
PowerKW 0.12 0.3 0.5 0.7 1.1 3 3×2
Centrifugal forceN 2500 5000-6000 10000-12000 10000 20000 75000 75000×2
Bin wall vibrating machine model CZQ314 CZQ534 CZQ1054 CZQ1076 CZQ20114 CZQ75304 CZQ75304

Note: this table is calculated according to the structure that the upper end of the silo is fixed and the lower part is in free state. Therefore, the data in the table should be properly corrected for the structure that the upper and lower parts of the silo are fixed.

 

5. Installation dimension table of CZQ wall vibrator on conical silo (without stiffener)

 

Model Vibrating motor installed Power
KW)
A B L0 L d Bolt t Weight
kg)
Silo volume
t)
CZQ314 VB-314-W 0.12 180 100 160 400 14 M12×45 1.2-3 60 1
CZQ534 VB-534-W 0.25 180 110 150 600 14 M12×50 3-4 90 3
CZQ634 VB-634-W 0.30 200 110 170 600 18 M16×55 4-6 90 3
CZQ1054 VB-1054-W 0.50 220 110 170 800 22 M20×65 6-9 110 10
CZQ1264 VB-1264-W 0.60 220 145 200 1000 22 M20×65 9-12 130 10
CZQ1076 VB-1076-W 0.70 220 160 230 1000 26 M24×70 6-9 160 20
CZQ20114 VB-20114-W 1.10 220 160 230 1200 26 M24×75 16-20 170 50
CZQ75304 VB-75304-W 3.00 380 125 340 1300 39 M36×110 19-22 380 150